Jump to content
SAU Community

Recommended Posts

Thanks Kirk......... at least sum 1 gets it!

Its easy to get mate. He is just being a bit of a prick seeming he has already been told twice what they are.

Spotted a white 33 in coolum parked near the bowls club this morning.

I followed a silver 33 on the bruce highway around narangba for about 10mins this morn (just after 6.30), followed him through traffic. Sounded nice! (086JHR)

Edited by BLiNKsTaR

hey guys... i thought i would ask how many people are going on the aussie day cruise...

http://www.boostcruising.com/forums/index....howtopic=366510

pm me to let me know if u wanna come along. :(

Had a red R33 behind me on my bike going up the peachester range yesterday afternoon, plates were xxx-LAY i think.

Spotted a red R34 heading towards bribie on bribie island road this arvo at about 4:30.

Spotted my self and a mate being Followed by 4 cop cars monday night

we were in some suburb on the north side cruising around at about 2am

came up to a set of traffic lights with some noise my mates exhaust dont help (4" Strait through to cannon) with aliesha driving his car

came around the corner to turn into the mcdonalds to get some food almost to the limiter to see 4 cop cars sitting there so we kept going but they saw(well most likely heard) us so we went around a few back streets but we knew we would have to go back so on the way back as its one of those places where there is only 1 way in and out so they were waiting so when we went up to them the first of the cops was going nuts at me and asking all questions like am i out street racing ect and i just told him the truth we were out driving around then he just started yelling saying how we shouldn't be doing this shit in his suburb and to f**k off home so i went down the street a bit further and spoke to 2 more cops in another car which were both cool with it and said to just keep the revs down at night :( - but aliesha in kierens car wasnt as lucky as when he asked her questions she changed her story a few times and asked for her licence which i cant believe he didn't say or do anything anything as hers is a NSW provisional licence :ninja: but to f**k off home

so basically when we left we had 4 cop cars following us into the city :down: i have never driven so slow in my life

i rate it the luckiest night ever as we could of both had our arses handed to us :laugh: especially aliesha with driving a turbo on her P's :)

Spotted heaps today.

673LFE Yellow stagea at mt.om shops

785KBD a black r33 also at mt.om shops

Just down at the lights from the bus stop there was a silver Stagea next to a silver r32 I think the plates were like AVG05 ???

Also spotted 06TST a white r32 with a silver R34 parked 2 spots infront of it across the road from Taringa HJs

Spotted my self and a mate being Followed by 4 cop cars monday night

we were in some suburb on the north side cruising around at about 2am

came up to a set of traffic lights with some noise my mates exhaust dont help (4" Strait through to cannon) with aliesha driving his car

came around the corner to turn into the mcdonalds to get some food almost to the limiter to see 4 cop cars sitting there so we kept going but they saw(well most likely heard) us so we went around a few back streets but we knew we would have to go back so on the way back as its one of those places where there is only 1 way in and out so they were waiting so when we went up to them the first of the cops was going nuts at me and asking all questions like am i out street racing ect and i just told him the truth we were out driving around then he just started yelling saying how we shouldn't be doing this shit in his suburb and to f**k off home so i went down the street a bit further and spoke to 2 more cops in another car which were both cool with it and said to just keep the revs down at night :D - but aliesha in kierens car wasnt as lucky as when he asked her questions she changed her story a few times and asked for her licence which i cant believe he didn't say or do anything anything as hers is a NSW provisional licence :rofl: but to f**k off home

so basically when we left we had 4 cop cars following us into the city :down: i have never driven so slow in my life

i rate it the luckiest night ever as we could of both had our arses handed to us :cool: especially aliesha with driving a turbo on her P's :cool:

Sounds like you guys were lucky, I got pulled over by one cop last night on Granard Rd and he defected the turbo and the intercooler piping, so now I have to get it all mod plated.

The worst thing is that I can't drive it untill it gets complied.

Also spotted a nice Black 32 at the BP at Ebbw Vale off Brisbane Rd yesterday around 5:15, had SAU stickers on the back side windows.

Edited by TJ_R33
Sounds like you guys were lucky, I got pulled over by one cop last night on Granard Rd and he defected the turbo and the intercooler piping, so now I have to get it all mod plated.

The worst thing is that I can't drive it untill it gets complied.

Also spotted a nice Black 32 at the BP at Ebbw Vale off Brisbane Rd yesterday around 5:15, had SAU stickers on the back side windows.

yeah i know i cant believe they only had a word and that was it when we were coming out i had already lubed up and had my belt undone ready to go

i rate it the luckiest night ever as we could of both had our arses handed to us :( especially aliesha with driving a turbo on her P's :P

spotted a black 33 in centro car park on thursday number plates 510 KEF

i could only find a park near you. took a picture....

15012009288.jpg

spotted 2 skylines on the way home from work...

silver 33 rego 119HLE on M1

maroon 32 (i think GTR not sure, was too far away) nice everything. lol.. was down my street (might still be) rego 869IUY

spotted some idiot in a 33 skyline plated were 494.LOF white R33 stock rims battered passengers door you where behind me all the way tailgateing me from logan road exit to loganlea road exit.. someday this guy will get a good beating from fellow skyline owners...

Oh and also spotted Becks on M1 :) damm u look soo different to your days in the suzuki ! (droolz)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
×
×
  • Create New...