Jump to content
SAU Community

Recommended Posts

I have two questions:

1. What do Oil Catch Cans do (other than looking pretty under the bonnet)?

2. Where/how does it connect?

These questions might sound a bit basic, forgive me for that, never looked into it ;)

Thanks in advance.

Edited by WhitePrincess
Link to comment
https://www.sau.com.au/forums/topic/192979-oil-catch-can/
Share on other sites

Well I installed my catch can for 2 reasons. Firstly I have an aftermarket turbo, which I run more boost than standard, and a custom intake which I have not plumbed the cam cover breathers into because - I have seen that from time to time for a variety of reasons my engine has had a bit of "blow by" and as a result vapourised oil from the crank case has passed into the intake and turbo and collected in my intercooler and some has gone back into the engine. Over a period of time the oil will eventually build up in the intercooler and you will have to pull it off to drain it and also there will bit an amount of performance loss etc. The catch can collects this vapourised oil instead of it being deposited into the intercooler etc. There are a few threads on how to hook them up on here too. If you need a photo and explanation of how I have mine just pm me.

Hope this helps you!

Smitty

PS. Secondly mine Cusco one looks all pretty cos its polished.

Edited by SmittyR33
Link to comment
https://www.sau.com.au/forums/topic/192979-oil-catch-can/#findComment-3465489
Share on other sites

lol did u look @ the other posts open on this?? i did post a couple of pics of where i was going to put it however, i have mounted the bracket above the turbo:S

the position is not a problem, just wanted to know where to connect the hoses... i have seen a few engine bay pics and there are a few different ways ppl connect it

Link to comment
https://www.sau.com.au/forums/topic/192979-oil-catch-can/#findComment-3470973
Share on other sites

yeaha i plan to connect mine between the passanger side rocker cover and the intake think this will give the best results, depends or ur engine set up i suppose. hame

can u make a photo once done, or draw on the photo, either way would be helpful.

thanks

Link to comment
https://www.sau.com.au/forums/topic/192979-oil-catch-can/#findComment-3472005
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...