Jump to content
SAU Community

Recommended Posts

hey guys,

car got stolen and aren't getting another one so i have some bits and pieces for sale

### all parts are from an r32 grt ###

3 x r32 GTR airflow meters - 1 not working, 2 good. $110 each for the good ones and i will throw in the bad one for free

6 440cc gtr injectors - were flow tested and used for approx 1000kms then pulled out for bigger ones. I has a leak so will only charge for 5 - $350 for all 6

Coil cover - is sprayed blue - $50 @@ sold @@

Tomei Hicas lock kit - never used but opened - $100 @@ sold pending payment @@

Cusco brake stopper - used with the bolts - $120 @@ sold @@

M's pod adapters and pods, are used and mesh is a little bent, but have been cleaned are re-oiled using proper K & N kit - $150 for both

R32 gtr standard computer - has a stage 1 upgrade on it - when dynoed was putting out 221 kws at the rears with just cam gears, and good mixtures - $130

R32 gtr wheels 16 inch with bridgestone re55s semi slicks - tyres have done 1 track day - 12 laps very minimal wear and filled with nitrogen which is unlimited re-fills - $1500

2 sumitomo - 275 x 35 x 18 - 2 tyres are cambered - 2 for $100 the lot - heaps of meat on the rest of the tyres @@ 2 x sold @@

2 Bridge stone - G3's - 225 x 60 x 16 good amount of treat approx 75% - $80 for both @@ sold @@

1 rear seat for r32 gtr, good condition no rips or tears and not faded very much - $150

3" Magnaflow catalytic convertor, never used - have had it stored for approx 2 years - $250

i think thats the lot, all prices are negotiable just send me a mail, and pics can be arrange but might take a while as items not stored at my house

pm me for more details

items are available in melb

Link to comment
https://www.sau.com.au/forums/topic/193195-r32-gtr-parts-semi-slicks/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...