Jump to content
SAU Community

Extractors?

mikey1717

By mikey1717,
in Engines & Forced Induction

 Share

Recommended Posts

unarmed_skyline Experienced

unarmed_skyline

Posted
Posted

yes it is worth it, everyone on here thats had them said they gain quite a lot out of them, if you do a search all the pro and cons have been gone over a few times, and i think eug is doing another group buy at the moment too so have a look at group buy section

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3478459
Share on other sites
GTS4WD Grand Master

GTS4WD

Posted
Posted
hey guys, i got a r33 gts, just wondering if its worth the trouble/money toget extractors for my r33.. any suggestions?? thanks!

cheers

theres a Group buy for them now..

http://www.skylinesaustralia.com/forums/Co...rs-t192351.html

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3479739
Share on other sites
Guest NVDGTS4

Guest NVDGTS4

Posted
Posted

Yeh i got a 2.5" catback system coz thats all i could get . There is no such " extractors" for my type of skyline that i can buy. I've got an RB25DE GTS-4 R33 Skyline and yeh i got a good muffler and it sounds like a f**kin rice cracker at 3000rpm other wise sweet. Its like a whipper snipper rasp! . i wish it was just stock now i hate it

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3481044
Share on other sites
GTS4WD Grand Master

GTS4WD

Posted
Posted
There is no such " extractors" for my type of skyline that i can buy. I've got an RB25DE GTS-4 R33 Skyline

And why would it not fit?..

There is not logical reason why it would not fit..

Just because you have an ATTESSA driveline does not mean you cannot buy extractors..

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3481048
Share on other sites
Eug Grand Master

Eug

Posted
Posted

rofl what!!!! didn't see that coming.

sure, ill do your dirty work ya bludgers :glare:

in all seriousness, i feel we need one every now and then and if you guys feel that i'm up for the task then sure i'll give it a shot.

p.s. - thanks for the vote of trust

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3481495
Share on other sites
unarmed_skyline Experienced

unarmed_skyline

Posted
Posted

well we defonatly need someone. so how about we get greg or someone who knows who to ask, to ask if they would let someone get mod status and then start a nomination poll with anyone whos interested, thats probably the fairest way to do it,

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3481936
Share on other sites
  • 2 weeks later...
ignuz Mentor

ignuz

Posted
Posted
rofl what!!!! didn't see that coming.

sure, ill do your dirty work ya bludgers :)

in all seriousness, i feel we need one every now and then and if you guys feel that i'm up for the task then sure i'll give it a shot.

p.s. - thanks for the vote of trust

mmm I did some behind the scenes work too a few months back lol.. I did PM a mod recommending you to become a moderator of the N/A section to fix it up etc, instead they just fixed it up themselves, didn't do much helped for a day or two.. And then the threads were back..

EDIT: Just saw you have a moderator tag lol! If anyone here deserves it it's you mate =)

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3504271
Share on other sites
Eug Grand Master

Eug

Posted
Posted
mmm I did some behind the scenes work too a few months back lol.. I did PM a mod recommending you to become a moderator of the N/A section to fix it up etc, instead they just fixed it up themselves, didn't do much helped for a day or two.. And then the threads were back..

EDIT: Just saw you have a moderator tag lol! If anyone here deserves it it's you mate =)

haha thanks Nick. i find that we self moderate here quite well, but any house keeping duties that come up can be amended straight away now, if required.

i have also taken on the sau qld executive job of treasurer and secretary now.

bit of a busy period for me at the moment with the change over from the old execs, but will hopefully be able to get that 'power thread' into a sticky soon to get the ball rolling. this section of the forums has really picked up recently thanks to you guys. more and more people are starting to become aware that owning a skyline isn't necessarily about having a turbo

cheers again

Link to comment
https://www.sau.com.au/forums/topic/193925-extractors/#findComment-3504569
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...