Jump to content
SAU Community

Recommended Posts

lol what a waste of a thread... people will only pay what they are willing to pay. around the brisbane area there is way more 33's so around here the price on 32's is a little higher. theres ooodles of both getting sold though, so its up to the buyer to deicde on the "thats to dear" or "thats a bargin"

  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

to the fella who started the topic:

F**K YOU! :D

Here you go mate..

Oh... I see your pain...

http://www.skylinesaustralia.com/forums/br...32-t182856.html

hey.. not my fault you paid too much for a nugget.

but it's ok..

you can sleep well knowing that you got a car with a boat anchor for a motor

Make sure you keep those revs over 4K mate.. you don't want to find your self in the Subaru Twin turbo style Valley Of Death

The R32's seem to be holding their value the past few years - So hard to find a clean example now so i went along with the importing route and scored a clean example for 12k which i thought was a reasonable price.

Re-itterating on a lot of points here, the P-Plate restrictions, lack of clean examples, baseline value are playing a huge part in the prices and there's nothing you can do about it. If you really like the car, you would fork out the money for the price being offered.

Everyone has their own opinion, it's just that hardly anyone can present a mature point - sound like a bunch of school kids fighting over what match box car is better than the other. Get over it - reading this shit puts me off visiting SAU.

hmm well personally i wouldnt pay $600,000 for a 30+ year old ford... but people do!

it comes down to what people want, and supply and demand!

...if no one wanted them, people would be struggling to sell them, so people would be asking less for them! Simple

Edited by Ruffels
hmm well personally i wouldnt pay $600,000 for a 30+ year old ford... but people do!

it comes down to what people want, and supply and demand!

...if no one wanted them, people would be struggling to sell them, so people would be asking less for them! Simple

You're comparing an R32 GTST to a GTHO? :rofl:

Here's another way to look at it.

Cheapest R32 GTST I've probably seen was about $6K.

a shitty, faded, 89 model with oil leaks etc etc.. what youd expect for that money right.

cheapst R32 GTR I've seen was $13K.

same condition.

Both same year

$7K apart.

new car price for both?

$40K for GTST??

$100K for GTR?

It's only the R32 GTST owners that seem to be confused about the value of their cars (mexicans I can understand due to P Plate restrictions)

$12K for a clean undamaged, smoke free R32 GTST is a fair price in my eyes.

people asking $16K for this sort of thing are Dreamers and only a SUCKER would buy at that price.

lol @ matchbox styles

Also lol @ rb20 = boat anchor, that means they should be in the 33 because they're a boat

:rofl::D

Actually i would probably get a S2 33 over a non-type M 32 (with the nice front bar)

Edited by GTAAAH
You're comparing an R32 GTST to a GTHO? :rofl:

Here's another way to look at it.

Cheapest R32 GTST I've probably seen was about $6K.

a shitty, faded, 89 model with oil leaks etc etc.. what youd expect for that money right.

cheapst R32 GTR I've seen was $13K.

same condition.

Both same year

$7K apart.

new car price for both?

$40K for GTST??

$100K for GTR?

It's only the R32 GTST owners that seem to be confused about the value of their cars (mexicans I can understand due to P Plate restrictions)

$12K for a clean undamaged, smoke free R32 GTST is a fair price in my eyes.

people asking $16K for this sort of thing are Dreamers and only a SUCKER would buy at that price.

you got that wrong ey... its not the OWNERS that are confused about the value of their car... its got to be the BUYERS, if you own a car you know is worth (example) $20,000, and someone offers you $24000, would you say no?? its a buyers market, the buyers bring the prices up or down, not the damn sellers.

you know if a car is over priced, cause it will start at (example again) $17,000...then go to $15500... then maybe 15k and so on till it reaches its price range.

there are plenty of "suckers" as you call them out there wanting to buy a car, and hell if a "sucker" come up to me prepared to pay more then the value of my car, il say yes!!

CJ

I reckon, that in the long run, better looking cars hold their value better. Now an rb20 is pretty easily replaced with a 25, but try and make a pig ugly 33 look like a 32..... sorry guys, but everyone know 32s are a way better looking car than 33s.....

people asking $16K for this sort of thing are Dreamers and only a SUCKER would buy at that price.

Doesn't the fact that we know there are suckers make us more opportunist than dreamer?

Despite being a little slow i feel the need to retort to some earlier posts

car018.jpg

fat_lady_eating_cake.jpg

and

Skyline_VTX_Bodykit.jpg

83mrtbuff.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...