Jump to content
SAU Community

R32 Gtr As A Daily Driver?

GTR75

By GTR75,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

GTR75 Rookie

GTR75

Posted
Posted

Guys,

I'm thinking about buying an R32 GTR but I would like to know people's thoughts on whether it could be a reliable daily driver. I've been reading the threads about maintenance and the lemons that are out there but no one really mentions anything about driving one day in day out.

Assuming you buy a genuine car in the first place with the usual replacement parts added, is there any inherent problem with the engine or componetry that common fails??

The car I'm looking at is modified but all work has been done over here within the last 16months. I've taken it for a good drive and all seems fine. Feels solid on the road, no shakes or noises and the gearbox feels okay.

I don't thrash the crap out of cars (that's what motorbikes are for!) so is there any reason I shouldn't get good longevity out of an R32 even driving it everyday??

Link to comment
https://www.sau.com.au/forums/topic/194442-r32-gtr-as-a-daily-driver/
Share on other sites
GTRsean Grand Master

GTRsean

Posted
Posted

Over 3 and a half years, daily driver, put over 80,000k on it now.

Replaced turbos, cv boots etc.

Regular oil changes, etc.

Just cost a bit more than a normal car to get parts sometimes.

Mr. Keets Grand Master

Mr. Keets

Posted
Posted

These cars were a well put together picec of kit, no pov spec deal. A well sorted one, or well cared for one will last as a daily driver. It depends on what your plans are for the GT-R, if budget is your concern then modifying one is probably not a great idea. I'd go a V-spec for the steel wheel turbs, no mods and then you'd have an enjoyable GT that would maintain alot of its value.

GTR75 Rookie

GTR75

Posted
  • Author
Posted

Thanks guys.

How long do you get out of the turbos? This car I'm looking at has Garrett 2860r turbos and all the major componentry has been replaced or upgraded in the past 12 months. Like I said, I drive pretty conservatively so I'm not stressing the turbos or gearbox compared with someone who just thrashes their car on the weekend.

Also, what is the fuel consumption like on a GTR when their not being pushed hard? I'm sure people are thinking that if I'm worried about trivial things like longevity and fuel use then I should get a Corrolla but I just want to have my cake.....

carizma Community Regular

carizma

Posted
Posted

Should be fine if you take care of it well.

I'd say it's probably better if you do a lot of reading on taking care of the cars so you know what you're getting into.

Any definitely take it to a mechanic to check it out for you, that'll save you a lot of hassle in the long run.

Krishy Grand Master

Krishy

Posted
Posted

well i have a r33 gtst series 1 for a daily and that thing hasnt given me any problems for the last 2 years.....normal drive during the week and bit of a fun session during the weekend....so my advice would be that if you do as you say and not thrash out the car day in and day out then you will be fine and also the life of the car will be longer

GTR75 Rookie

GTR75

Posted
  • Author
Posted

Cheers guys.

Yes it will be taken care of and not thrashed. The one I like has got a Power Fc with the hand controller so the first thing I'll do is get a sensible safe base tune. Of course I'll have a map for some decent boost and power but it will rarely be used. I want a GTR R32 because I don't think there's better car available for the money. The options for performance seem to be endless...unlike my cash flow unfortunately!! And the Bathurst legend is undeniable. No offence to owners of later models but in my opinion the R32 is king.

  • 1 year later...
unix Enthusiast

unix

Posted
Posted (edited)

Man whats the point in having a gtr with 2860r's if your not gonna thrash it? Everyone thrashes there gtr at somestage there made to be thrashed sometimes you sound like you should have a old classic mustang or something wtf Boost and power that will rarely be used hahah

Edited by unix
Rhyou Apprentice

Rhyou

Posted
Posted

Good choice of car, I'll have to say :D I'm planning on getting one as well (once I'm off the damnned Ps...) so I would be interested in the responses. From wat I've heard, they're great daily's, expensive, but still great. Only problem is finding a decent one... oh well, nothing good comes easy :down: Good luck with the buy mate.

@ unix: Leave him alone dude. It's his car, he can do whatever he wants with it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...