Jump to content
SAU Community

Greddy Profec B Spec2 Gain

rbee25

By rbee25,
in Engines & Forced Induction

 Share

Recommended Posts

rbee25 Apprentice

rbee25

Posted
Posted

all,

Just wondering what gain you set on you Greddy profec B spec 2 controllers??

I have heard too little and ou dont get maximum spool up of your turbo, and too much , and you get spikes.. I understand that it differs from turbo to turbo so I'm wondering how much gain ppl set for a stock turbo on an R33.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/194484-greddy-profec-b-spec2-gain/
Share on other sites
skylinecouple Experienced

skylinecouple

Posted
Posted

Set your set gain to within 4lbs of your boost setting. Then turn up your gain to the highest point where it starts to spike. .5 lbs over is ok but try to get it to not go over what you have set the boost at. Now continue to turn up the set gain till it starts to spike. I have mine at 2lbs below 17lbs. Which is of course 15lbs. The gain controls sensitivity and set gain controls how long the waste gate stays closed till boost is reached. On a stock turbo the higher the better, with a lot more power perhaps set the set gain to a lesser amount so the waste gate opens earlier and boost will hit more gentily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • MBS206
      NC MX5

      By MBS206 · Posted

      It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • Duncan
      NC MX5

      By Duncan · Posted

      oh yeah, reminded this morning....bin lids frozen shut too
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      In my case not, because of total reno. But yeah.
    • FRGTN1
      R34 Manual conversion Speedometer

      By FRGTN1 · Posted

      Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...