Jump to content
SAU Community

Recommended Posts

straight bolt in mate. r33 gtst and gtr seats u can swap.

with the rear, undo the 2 bolts on the floor then from the corners push back on the front of the seat and pull up.

Cheers guys, done it today, all bolted straight up like you guys all said, damn the r33 gtr rear seats are like bucket seats in their own respect hahhaa. One of the best purchases ive made, rock solid seats, but support like hell :D

did u buy them from ebay by any chance?

  • 2 weeks later...
did u buy them from ebay by any chance?

I bought that rear seat off Ebay and it doesn't fit into my gtst. The pins that go into the floor are too far apart and the lugs on the back rest are too low and don't stick out far enough? Do Gtr seats only fit into series 2 or all gtst. Mine is a series 1.5. but i've been told that series 2 seats fit into series 1 anyway?? If i can't get them to fit I'll just have to sell them and make myself a nice little profit.

  • 2 weeks later...

I thought the seats might be R32 GTR as I have seen a couple pictures of both and they look more like the r32 gtr but the guy i bought it off said they came out of a r33 v-spec gtr. I don't have the internet on at the moment but as soon as i can i'll put a couple pictures up and maybe someone might be able to help. I've had 3 people tell me that the r33 gtr was the only car to come out with red stitching. The width and length are right but the mounting pins are all over the place and the arch in the centre where it goes over the tailshaft looks way too high.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...