Jump to content
SAU Community

Recommended Posts

straight bolt in mate. r33 gtst and gtr seats u can swap.

with the rear, undo the 2 bolts on the floor then from the corners push back on the front of the seat and pull up.

Cheers guys, done it today, all bolted straight up like you guys all said, damn the r33 gtr rear seats are like bucket seats in their own respect hahhaa. One of the best purchases ive made, rock solid seats, but support like hell :D

did u buy them from ebay by any chance?

  • 2 weeks later...
did u buy them from ebay by any chance?

I bought that rear seat off Ebay and it doesn't fit into my gtst. The pins that go into the floor are too far apart and the lugs on the back rest are too low and don't stick out far enough? Do Gtr seats only fit into series 2 or all gtst. Mine is a series 1.5. but i've been told that series 2 seats fit into series 1 anyway?? If i can't get them to fit I'll just have to sell them and make myself a nice little profit.

  • 2 weeks later...

I thought the seats might be R32 GTR as I have seen a couple pictures of both and they look more like the r32 gtr but the guy i bought it off said they came out of a r33 v-spec gtr. I don't have the internet on at the moment but as soon as i can i'll put a couple pictures up and maybe someone might be able to help. I've had 3 people tell me that the r33 gtr was the only car to come out with red stitching. The width and length are right but the mounting pins are all over the place and the arch in the centre where it goes over the tailshaft looks way too high.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...