Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: KRPS13 (180sx), minus the K because hicas is locked. :verymad:

Milage: 120,00 on chassis, 20 thousand on new engine.

Transmission: 5 speed manual

Colour: black

Location: Mannum

RWC supplied? n/a

Currently registered? sure is

Price: 14k-Neg.

Contact: Tim-Via this thread, pm or mobile 0407795149

Comments / Modifications:

time to sell the 180 and get something different.

heres a run down; i bought it stock and have done all the mods myself, apart from the obvious stuff.

1991 180SX-sunroof model

5 speed manual SR20DET

Rebuilt with forged pistons by Chris Milton Engines-receipt included.

Full 3 inch turbo back mandrel bent exhaust with hi flow cat and stainless steel muffler-receipt included-still with warranty

FMIC

Brant AA02A alarm with triple cut, glass break sensor, battery back up siren and 2 remotes-receipt included

Turbotech boost controller-set at 12psi

Rear Tein coilovers. stock struts included.

Locked hicas, with lock bar and all lines and hicas pump removed all the way to the front-done properly, not looped back at the rear of the car, hicas light has been disconnected, but will still come on if power steering level is low. like i said, done properly.

Rear strut brace.

Speco 2 inch boost, oil press and water temp gauges.

turbo timer-not installed

battery box and cables/terminals for battery relocation-not installed.

K&N pod filter

A/m steering wheel.

Kenwood h/u, pioneer 4-way 6 inch speakers in doors, kenwood 6x9s rear.

Rw front bar(black), i hit a rabbit driving home and broke a chunk out of it, so zip tied it back together.

Type x front bar(white)-currently on the car-car will come with both front bars.

Nismo side skirts.

vented headlight cover

now for a few minor problems.

no rear seatbelts. got the buckles, but not belts.

minor scratches, dents around the car, bit of paint fade on the bonnet-all been there since ive had it, nothing that cant be expected of a 15year old car.

speedo is out by 20k. ive got an rsm, so dont use the dash speedo. may include rsm in sale, havent decided yet.

sunroof rattles a bit, but is fixable.

serviced every 5000ks. running royal purple oil and using genuine nissan oil filters. always run on BP ultimate.

it had a dyno tune before the rebuild and made 126kw on stock boost. i have a printout for it. hasnt been tuned since it has been built.

never been on a track or defected or had any other problems. ive owned it for about 2 years and other then over heating once due to blocked raditor it hasnt skipped a beat.

i have a folder full of receipts for everything thats been done to it, from the engine receipt right down to the wire used to wire up the gauges.

it will come with some stock parts, intercooler etc, and a bunch of other stuff, (unused battery box, turbo timer etc)

im sure ive forgotten some stuff, but ill put it up as i remember.

ill put some up to date photos up soon, but all thats changed is the front bar.

Images:

11.jpg

DSCF0637.jpg

DSCF0585.jpg

DSCF0506.jpg

Edited by ted180
Link to comment
https://www.sau.com.au/forums/topic/194584-sa-krps13-180sx/
Share on other sites

should have no trouble selling this, we get inquiries for 180sx's all the time.

difficult to get them at a good price from Japan.

good luck with the sale!

Link to comment
https://www.sau.com.au/forums/topic/194584-sa-krps13-180sx/#findComment-3487769
Share on other sites

couple of things i forgot to mention;

either of the 2 front bars can be resprayed for serious buyer.

and i would like an R32 GTR, so ill accept swaps plus cash your way if you have one that suits me.

to keep this car as legal as possible ive done the following;

removed bov and replaced with stock piping.

removed turbo timer.

moved guages below the dash(legal).

only thing that can it can be defected for is coilovers. but with no bov or turbo timer there is nothing that will draw attention to the car, so getting pulled over isnt a common occurance.

and ive got hardcopy technical manuals.

Edited by ted180
Link to comment
https://www.sau.com.au/forums/topic/194584-sa-krps13-180sx/#findComment-3489640
Share on other sites

the owner of this car treats it like a baby, i can vouch for the fact that its well looked after. never thrashed, regular servicing and maintenance done. only tasteful mods and a nice looking car too! :D

Link to comment
https://www.sau.com.au/forums/topic/194584-sa-krps13-180sx/#findComment-3491801
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...