Jump to content
SAU Community

Recommended Posts

I have a Skyline GTR track only vehicle. - Gun Metal Grey

It has the best tyres you can buy on them, 7k worth of suspension - ALL HKS. This vehicle is fully ready for race, roll cage has been taken out along with gauges. (not regoable) - well it is.. i have a complied and registered shell here waiting...

this car is grey.. i will have pics soooooon

Toe in/out bars

Coilovers - Best ones HKS make

Control Arms,

Castor Rods

Cusco Strut braces

Sway bars

Its got a Kakimoto Exhaust on it

HKS oil cooler

HUGE front mount, and i mean its HUGE!!!

5 core fully aluminum radiator, custom built

The beefest HKS clutch package you can get

LE Kakimoto rims - You CANT buy these rims new anymore

Full HKS FMIC kit

The list goes on and on

Asking $9500 ono

needs bonnet and front bar - i can organise that though for little extra

Edited by Rude Carz
Link to comment
https://www.sau.com.au/forums/topic/194823-eoi-gtr-skyline-r32/
Share on other sites

located in bris, more than happy to ship/truck it

this car is grey.. i will have pics soon.

car has had most of the dints taken out, still in primer in spots.. can paint it for a little bit of money.

not regoable.. although i do have complied and perfect condition shell here. car is a 93 i believe

COMES WITH A APEXI FC!

APEXI FC AND 700HP fuel pump was paid for today - wil install tomoro night. pump is a genuine Walbro

No expense spared with this

11k with bonnet, bar, tune and paint done

$10. 600 with bonnet bar and paint work done

Shell has a rear quater panel cut out, easy fix

and there is a little dint on the front - minor

this shell has NOT been registered in any way shape or form as written off so it still can be used.

will post pics up and pm you some pics there champion :D

DAAAN

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...