Jump to content
SAU Community

Recommended Posts

Hi everyone,

A very weird problem had just occured. i drive a r34 gt-t in automatic/tiptronic. i was driving down a slope when i started to notice that my car started spluttering. it was raining and i thought that some water had gotten into my intake so i just hit the accelerator harder. when i did that it spluttered more and started to stall. i pulled over and put it into neutral and just started to rev it out. put it back into drive and it just stalled. i tested out every gear and put it into reverse and it was fine. put it back into drive and it stalled again. gave it some revs in neutral and chucked it into drive and then stalled again.

all this resulted in me waiting 1.5 hours for a tow truck and then got charged $80 for a 5min ride :)

its at hills motorsports now and they are going to look at it tomorrow. hopefully it wont be too expensive. this is my 2nd incident regarding the rain....first was a misfiring/cant start issue.

any insight or information would be greatly appreciated!

cheers!

being auto, and you said it works ok in nuetral and reverse, my guess would be the isolator/safety switch that wont let you start the car in gear?

Im no expert, but its just an idea. maybe its got a loose connection or exposed wire somewhere

do you have an aftermarket vent to atmosphere BOV?

nope...bov in standard position

One would think its electrical, if it only occurs in the rain. Have you changed anything recently? Do you have a vented bonnet? CAI? Try checking error codes.

no vented bonnet. the mechanics seem to think thats its electrical but still not sure yet. no cai.

if it's rain related, it must be water getting in to something.

Vented Bonnet = spark plug swimming pool

fully sick pod filter in front bar = wet muff .. sorry.. I mean wet MAF.

im not so sure if its just a coincidence with the rain that my car always seems to break down on. but yea last time i had the spark plug swimming pool incident regarding it so no vented bonnet. also my pod is at the standard position where my airbox use to be.

being auto, and you said it works ok in nuetral and reverse, my guess would be the isolator/safety switch that wont let you start the car in gear?

Im no expert, but its just an idea. maybe its got a loose connection or exposed wire somewhere

no idea.. its not that it wont start in gear..u cant start autos in gear.. it just keeps stalling in gear thats all except for reverse which is weird.

thanks everyone :D

i just heard back from the mechanics. he plugged the scanner on and it didnt show up with an error code. he says that its either mechanical or theres a problem with the ecu.

just wondering if anyone else has had this problem before??

finally got a word back today after a whole week of it sitting in storage. he had told me that the computer was not giving out any power. power was going in but not coming out so he sent it away to get it tested.

does this sound right to anyone?

if the computer didnt work then the car wouldnt start right?

don't get it repaired.

buy another stock auto ecu from wreckers or these forums.

cost a fraction of repair..

but you're right.

the ecu controlls everything including the auto box.

so if it was faulty, it wouldn't run at all.

I don't know muuch about auto's, but there must be something that controls idle when in gear.

just like when the air con is on etc..

yea just got word back from mechanics couple days ago.

the 1,2 shift valve solenoid has failed. this means that when drive is selected, 1st and 2nd gear both comes on at the same time. now im just patiently waiting for the part to come in. im a little annoyed as he promised to have my car ready 2 days ago but he had ordered the wrong part for my car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
×
×
  • Create New...