Jump to content
SAU Community

Recommended Posts

Hi All,

New here, and looking for a bit of advice if you could spare it. I own a V35 Skyline 250GT Sedan which was imported from Japan. I recently noticed a knocking noise coming from the left front wheel whenever I turned or reversed round a corner slowly. It almost sounded like a worn CV joint, but being a RWD car it doesn't have a CV joint.

Either way, I took it into the local repair shop to have it checked out, and they told me it was the shocks that required changing. The only problem is that the automotive repair shop told me they've searched far and wide for replacement shocks (geniune and aftermarket) for the V35 skyline, and haven't been able to find them (I'm from Auckland, New Zealand). Effectively they told me they can't do anything for me unless short of me asking Nissan NZ to specially import some shocks in for me, which would of course cost a fortune. They even went as far as saying that they've had 3 v35 skylines in and they've been nothing but trouble - a black sheep in the nissan family as it were since parts were impossible to get.

Either way, it'll cost me a fortune to get geniune shocks from Nissan NZ, I figured it'll be cheaper to buy aftermarket shocks off ebay for the G35, get them imported here and get them installed. I've searched the various g35 forums, and the only shocks I can find that suit the G35 and are on ebay are Tokico DSP-7's. So my question really is: Given that these fit a G35 sedan, will they be guaranteed to fit a V35 Skyline Sedan? I positive that they will, but I want to double check, since I don't want to fork out money for no reason.

If anybody has any good advice for me, for example where I can get suitable shocks from, or if there are better shocks, I gladly would welcome it.

Thanks in advance.

Gene

Link to comment
https://www.sau.com.au/forums/topic/195507-recommended-shocks-for-v35-skyline/
Share on other sites

Thanks to both the above replies. You won't know how much that has helped me. So thanks!

So far I've taken my V35 to two pretty well known repair shops here in New Zealand (Pit Stop and The Shock Shop), and both have contacted their suppliers who have reported back that they don't stock any shocks for the V35.

350z shocks are a direct fit mate, I'm running 350Z tein Super Streets, really good for daily driving.

Regarding the tein Super Streets, I noticed that you've got a V35 Coupe. Would these fit on a V35 Sedan which I have?

Thanks again.

Gene

Sorry mate i didnt realise it was a sedan, if they are nething like previous skyline models they should but i dont know for sure. You could try cross refrencing sedan and coupe part no.'s from us website perhaps? Only other thing i would be concerned about is correct spring rates as i would assume the sedan is slightly heavier in the rear end.

I had a quick look- and the part numbers for Tein Coilovers for

350Z Coupe and Convertabile/ G35 Coupe/ G35 sedan.

same same same same same.

Model

Body Year Tech Info PART NO.

MSRP Spring Rate Upper

Mount Ride Height Ride Height Adjust Range

Front Rear Front Rear Front Rear

kgf/mm,lbs/in

Part# kgf/mm,lbs/in

Part# mm

inch mm

inch Max/Min

(mm-inch) Max/Min

(mm-inch)

G35 Sedan

V35 03-06 DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -60

-2.4 -21

-0.8 -9

-0.4 ~ -94

-3.7 3

0.1 ~

G35 Coupe

V35 03+ DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -38

-1.5 -26

-1 9

0.4 ~ -69

-2.7 -2

-0.1 ~ -38

-1.5

350Z

Z33 03+ DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -22

-0.9 -21

-0.8 34

1.3 ~ -59

-2.3 3

0.1 ~ -33

-1.3

350Z convertible

Z33 03+ DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -16

-0.6 -13

-0.5 41

1.6 ~ -54

-2.1 13

0.5 ~ -26

-1

email jason from riverside infiniti in the USA.. he wil be able to answer any questions for you about the compatibility and will be able to sell and ship any genuiune nissan part to you

jmendelson (at) riversideinfiniti.com

yeah, he is a top seller. bought 5/16 plenum spacer and double din dash kit from him.

i'm highly recommended tokico shocks, ride as smoth as stock also perform well in the corner, had them for 4 months, very happy every moment!!!

it only cost about aud$750 shipped from usa

Edited by spikey
I had a quick look- and the part numbers for Tein Coilovers for

350Z Coupe and Convertabile/ G35 Coupe/ G35 sedan.

same same same same same.

Model

Body Year Tech Info PART NO.

MSRP Spring Rate Upper

Mount Ride Height Ride Height Adjust Range

Front Rear Front Rear Front Rear

kgf/mm,lbs/in

Part# kgf/mm,lbs/in

Part# mm

inch mm

inch Max/Min

(mm-inch) Max/Min

(mm-inch)

G35 Sedan

V35 03-06 DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -60

-2.4 -21

-0.8 -9

-0.4 ~ -94

-3.7 3

0.1 ~

G35 Coupe

V35 03+ DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -38

-1.5 -26

-1 9

0.4 ~ -69

-2.7 -2

-0.1 ~ -38

-1.5

350Z

Z33 03+ DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -22

-0.9 -21

-0.8 34

1.3 ~ -59

-2.3 3

0.1 ~ -33

-1.3

350Z convertible

Z33 03+ DSP26-6UAS1

$1860.00 12/671

SL120-01200 12/671

S5P25-01120 P/U -16

-0.6 -13

-0.5 41

1.6 ~ -54

-2.1 13

0.5 ~ -26

-1

all the aftermarket suspension can be shared both with 350z and v35. but for 350z shocks is about 3/8 shorter than v35. as for spring, the rate is higher in the rear than v35 which is more stiffer.

If its compatible, and you're just after dampers, I can highly recommend the Koni Yellows.

Before I put in Tein coilovers I ran OEM springs in my Z33 with Koni Yellows, and they were great. On full soft they're softer than stock. The car was a bit floaty but it rode so nicely, and since they adjust bound and rebound together with the valve when you stiffen them up you get better response everywhere.

The rear adjustment valve is on the side of the strut, so all you have to do is jack up your car enough to get your arm between the tyre and the guard. A lot better than most dampers that have their adjustment thingy at the top, which in our cars means drilling through trim or pulling the strut out.

  • 5 years later...

CV joint crackling sound from front passenger side.

I had same issue with my 300GT and it was not the shock absorbers.

It was an issue with VVT (variable value timing). According to techs it is a common fault with this gen skyline.

Luckly i has mechanical insurance. Engine needed opening up.

1 year later my shock absorbers are now leaking.

I can fix the cam actuator without opening the engine or removing it. Definitely a common issue but more likely caused by running too thin or thick an oil. Of the many times I have heard the knocking from the actuator only once have I had to change the unit. The other times I simply filled the engine with a fresh batch of 10w40 and it went away.

Get a set of BC coilovers, cheaper than replacing the stock shocks.

I thought that the suspension between the 250gt and 300/350gt was slightly different. but for a 350gt i know that 350z parts are compatible. mum has yellow konis in her car front and rear and it makes a huge difference. its firm but not twitchy. the valves in koni shocks can also be adjusted softer, if the manual adjustment isnt enough

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...