Jump to content
SAU Community

Recommended Posts

not sure if something like this has been posted already and after 2 bottles of red can't be bothered checking.

serious car audio n00b here so laymans terms please.

i'm off to japan soon and was thinking about bringing back a new head unit. but the more i thought about it (and the better the dollar does) the better the unit i want to get.

was going to get an in car dvd but they scream "steal me!" was thinking to get a mp3 minidisc player and hook it into my current system.

how would i do this? would i need an amp? i currently have a shite sony xplode deck.

or could anyone recommend other options? help me please! i don't want to come back from japan without a schmick new 'whatever' to show off!

Link to comment
https://www.sau.com.au/forums/topic/19558-help/
Share on other sites

If the aftermarket stuff has same problems of the stuf that comes from the factory's ie: the factory cd player that came in my line.......it wont work any way lol, i think that maybe just the cd player that was in my car though, you will stilll need ot get frequency expander and the such any way.

Link to comment
https://www.sau.com.au/forums/topic/19558-help/#findComment-411936
Share on other sites

you can get international items. stuff that alreday has been set up to be able to play in different countries.

but forgetting that for now, how can i get a portable mp3 to work through my cars system? do i need an audio line in in my head deck? can i hook it into an amp? what's the best way?

Link to comment
https://www.sau.com.au/forums/topic/19558-help/#findComment-416119
Share on other sites

If you mean portable like a creative mp3 unit, that would be easy all you need is to pull the rca out of the back of your head unit and buy a stero>rca lead and hook the to rca ends up, and put the stereo plug in the headphone socket of your mp3, i do this with my my p/a system in my bed room, hook my discman,mp3 etc via the rca input. Only prob is that if you have any speakers hooked up to your head unit they wont put any sound out, makes shure you dont pull out the remote wire or the amp wont turn on. A bit of a pain every time you want to swap between sound sources, you could buy two extra rca cables (like those used to hook up the multi channel amps) and have your cd and mp3 hooked up at the same time.

Link to comment
https://www.sau.com.au/forums/topic/19558-help/#findComment-418197
Share on other sites

  • 2 weeks later...

I have done this in my car, when i had head unit issues. Works well.

BUT, u should maybe check out the voltage that your portable player puts out, and whether the amp is meant to recieve the same voltage.

Also, most discmans/mp3 players start to distort quite easily when u turn the volume of the output up, which is easily heard in the car.

Link to comment
https://www.sau.com.au/forums/topic/19558-help/#findComment-437605
Share on other sites

Depending on the head-unit only high end (nakamichi, eclipse etc..) NEED and amp to run speakers but all systems will sound better run off decent powered amps, generally the more power, the more control, so better sound. By this i don't mean buy a more powerful amp like a powerful low quality amp over a lower power quality amp. As for it working, all that is different is if you have a tuner, you will need a frequency expander as in japan radio stations broadcast on different frequences to asutralia, and if you buy a dvd player i think they need converting or sumthin. Also if you plan on addind a stacker later the japanese models may have different connections to the australian models even i n the same brand.

Link to comment
https://www.sau.com.au/forums/topic/19558-help/#findComment-437614
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...