Jump to content
SAU Community

Recommended Posts

Hey Guys, just got an R32 RB20DET 1/2 cut to do a conversion into my 180sx. It arrived and is in VERY good condition!!

I already had a gearbox, will now have one spare so will be selling it all as a manual conversion package. Unless the price is right...

Below are pics of what there is... Basically I am removing engine package and brakes. Everything else is up for sale.

All Items come from this nice, clean R32GTS-t Half cut... Genuine 80,000kms – With Exception to the obvious (I.e. 180sx bits)

Stock Front bar (Average Condition) – Pickup Only - $10

r32sale01mj1.jpg

Glovebox – $20 Pickup or $40 Posted

r32sale11fl6.jpg

Instrument Cluster (Just under 80,000km) – $50 Pickup or $70 Posted

r32sale12tp0.jpg

Thermo Fan – $15 pickup or $35 Posted

r32sale30ry2.jpg

Washer Bottle – $15 Pickup or $30 Posted

r32sale31yd3.jpg

Engine Fan – $20 Pickup or $40 Posted

r32sale32ll4.jpg

Stock Intercooler (no piping) – $20 Pickup or $40 Posted

r32sale33cp8.jpg

Aircon Condenser – Pickup Only $20

r32sale34pn8.jpg

Climate Control Unit – $40 Pickup or $50 Posted

r32sale39ac3.jpg

Steering Wheel (Shithouse Condition – No Horn Button) – Free Pickup or $20 Posted

r32sale40pj1.jpg

ABS Controller Unit – $50 Pickup or $70 Posted

r32sale42un1.jpg

Front ABS Senders/Sensors – $20 Pickup or $30 Posted

r32sale43tt1.jpg

Aircon Bottle/Canister – $20 Pickup or $30 Posted

r32sale44ub8.jpg

Front Wiper Motor – $10 Pickup or $20 Posted

r32sale45cb6.jpg

Kick Panels – $10 each Pickup or $20 each Posted ($30 for the pair Posted)

r32sale46ad1.jpg

Empty Front Cut – Pickup Only – Free

r32sale47xm3.jpg

Dash (Average Condition) – Pickup Only - $10

r32sale49ak7.jpg

Aircon Compressor – Prefer Pickup - $30

r32sale51vf4.jpg

Front Sway Bar – Pickup Only - $10

r32sale52hr3.jpg

Bonnet Catch Etc – $20 Pickup or $30 Posted

r32sale53kg4.jpg

180sx Hatch Brake Light – $10 Pickup or $20 Posted

r32sale54jn5.jpg

180sx Mirrors – $30 Pickup or $50 Posted

r32sale55vy2.jpg

180sx Front Indicators – $15 Pickup or $25 Posted

r32sale56pc2.jpg

R32 Skyline Gauge Holders (One Damaged – as in Pic and Other Brand New – Purchased off Ebay and never fitted. Looks the same, may need trimming) – $30 for the pair Pickup or $50 for the pair Posted

r32sale57hb4.jpg

r32sale58qm0.jpg

r32sale29ym3.jpg

Well, as you can imagine, this has taken me quite a while!!

You are best to PM, SMS or Give me a call.

Thanks,

Todd

Ph: 0400 113 776

Edited by CATKICKER
Link to comment
https://www.sau.com.au/forums/topic/195607-r32-gts-t-halfcut-cleanout-more/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

HUGE UPDATE IN THE FIRST POST AND HERE!

Front Sway Bar – Pickup Only - $10

r32sale52hr3.jpg

Bonnet Catch Etc – $20 Pickup or $30 Posted

r32sale53kg4.jpg

180sx Hatch Brake Light – $10 Pickup or $20 Posted

r32sale54jn5.jpg

180sx Mirrors – $30 Pickup or $50 Posted

r32sale55vy2.jpg

180sx Front Indicators – $15 Pickup or $25 Posted

r32sale56pc2.jpg

R32 Skyline Gauge Holders (One Damaged – as in Pic and Other Brand New – Purchased off Ebay and never fitted. Looks the same, may need trimming) – $30 for the pair Pickup or $50 for the pair Posted

r32sale57hb4.jpg

r32sale58qm0.jpg

R32 GTS-t Manual Conversion Package

Includes:

RB25DE 5sp Gearbox (80,000kms) – Same as RB20DET

Used Factory Clutch Kit

Rubber Shift Boot

Flywheel

Clutch Pedal

Brake Pedal

Clutch Master Cylinder + Lines

Clutch Slave Cylinder

Instrument Cluster Surround

Centre Console Surround with Gear boot

All Nuts, Bolt Etc

PLEASE LET ME KNOW IF I AM MISSING ANYTHING THAT IS REQUIRED

Price $900 FIRM, Prefer Pickup but will pack and ship on pallet if buyer organises and pays freight.

WILL SELL BOX ALONE FOR $600 FIRM

r32sale60dz4.jpg

r32sale61kx7.jpg

r32sale62pv3.jpg

r32sale63uv8.jpg

r32sale64ap4.jpg

r32sale65bv1.jpg

r32sale66lj6.jpg

r32sale67ta5.jpg

Thanks,

Todd

Ph: 0400 113 776

Edited by CATKICKER
  • 2 weeks later...

hey todd, ure a bloody hard bloke to get a hold of over the phone! noticed you only had $10 on the stock bar, how much on the reo ....? (I can view the pics, but how pushed in is the bar? bit more than love taps or not?? I'll freight it up here to me, can have it picked up from ure house, Damo

Edited by madaz R33
  • 1 month later...

hey Todd, intereseted in a price for the centre surround console and gear boot cover, this prob doesnt make sense but also want the inner console piece to go with the centre surround console,

thanx Damo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...