Jump to content
SAU Community

Recommended Posts

Hey All,

Time has come to sell my Cefiro, rarely drive it and it just sits there gathering spider webs.

Here are the specs and what I can remember:

* RB25DET (Serviced every 4000kms with Royal Purple)

* Manual

* ~114000kms

* Rego till 22 Nov 2008

All below work performed at 85000kms (Have receipts to prove)

* Timing belt changed

* Drive belts changed

* Idler for cambelt

* Tensioner for cambelt

* Water pump changed

* Thermostat changed

* New gearbox mount

Car has always been tuned at Unigroup Engineering.

Engine Mods

* 272rwkw @ 1.2bar, has been tuned to run 1.5bar for massive midrange (Have dyno sheets)

* FMIC

* Full 3” turbo back stainless steel exhaust (CAT replacement pipe)

* Apexi pod filter

* Splitfire coilpacks (Less then 10000kms old)

* HKS 2835 Pro S kit with X-Force Manifold (less then 5000kms)

* Apexi Power FC with HC (Less then 10000kms old)

* Z32 AFM (Less then 10000kms old)

* Nismo 555cc Injectors (Less then 10000kms old)

* HKS 264° EX and 256° IN cams (Less then 1000kms old)

Suspension

* Kei Office coilovers (less then 15000kms old)

* Adjustable camber arms

Drivetrain

* Exedy Sports TUFF clutch (less then 1000kms old)

* R32 gtst front brakes with BM44 BMC

* 17” Enkei RP01’s

Interior

* HKS 1.5bar boost gauge

* Blitz dual stage EBC

* Nardi steering wheel

* JVC MP3 player

* Late model rear seats and door trims

Exterior

* Front and rear Autech bars

* Clear front indicators

* Late model rear tail lights

Issues

* It currently has a RB20DET gearbox so dont expect that to last at the current power level, it has held up pretty well so far though.

* Air con does not work as it was never converted to R143A after being imported.

* Paint and body need some minor work. Clear coat is peeling off the bonnet, roof and boot lid and there is a dent on the passenger side sill. There are a few other minor scratches and whatnot.

Pics can be found here:

http://users.tpg.com.au/mys013/index.html

Its not the best looking car out there but it is extremely quick! If your looking for a show car this isnt the car to be looking at.

Im after $14000 but Im pretty negotiable as it has to go. Car is located in Sydney.

Email - [email protected]

James

Edited by MYS013
Link to comment
https://www.sau.com.au/forums/topic/196006-1988-nissan-cefiro/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...