Jump to content
SAU Community

Recommended Posts

I have recently imported a 1997 R33 GTST skyline and was wanting to put in a turbo timer myself. I did quite a bit of research and found the one that i wanted which was the HKS type 1 turbo timer. I bought this and the harness and have been installing it today.

The car has a basic immobiliser.

I installed the harness fine and it works showing the battery voltage but because the skyline ECU is located next to the battery in the boot i am stuck trying to install the rpm Brown wire and the blue speed wire because i do not know where the ECU wires go. I have the pinout diagram of the R33 ECU and know what they need to be connected to but the turbo timer wires will not make the distance and i was hoping that they will come out under the dash but i am not sure which ones?

I was wondering if anyone has installed the HSK type 1 turbotimer into their R33 and if they have could they please give me a hand with info on where to connect these wires?

Thanks Heaps!!!

ok first problem here is that the ecu is not in the boot! its behind the passenger kick panel on the lower left of the footwell...

WTF i'm no stupid. When u take down the divider between that compartment it is practically in the boot. All i need to know is where the wires from the ecu go (rmp and speed).

If u havent got anything helpful to post don't post then

WTF i'm no stupid. When u take down the divider between that compartment it is practically in the boot. All i need to know is where the wires from the ecu go (rmp and speed).

If u havent got anything helpful to post don't post then

geez, he's trying to help you and you bite his head off!

keep looking in the boot then and let us know how you go when you have it installed

Whats it doing back there?? Have you had it moved, cause last time i checked the HICAS steering-ECU sat back there and the ECU on my GTST (which i changed 3-4 times) sits near the passengers feet, behind the panel...

Anyways mine came with one installed, it was all in the harness, just plug and play... Know that since i removed it some months ago.

Hope it'll sort out!

Cheers!

  • 1 month later...

Hi all, I have recently puchased one of these units as well, unfortunately it didn't come with an R33 plug. Lucky for me I have wired up a few things before. My question is, are there any harnesses off the steering column that will allow me to avoid having to wire all the way to my ecu? does anyone have a wiring diagram for the steering column?

Cheers, Dan!

Last time I checked my ECU was at the passenger footwell too!

wrong!

its in the boot because he says so!

PS: good luck wiring your turbotimer to the battery / fuse box etc. should work a treat!

gold.

  • 2 years later...
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Took it to all Japan day. Thrashed it all day and it will still drive home. Very very happy man right now 
    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
×
×
  • Create New...