Jump to content
SAU Community

Recommended Posts

Have an apexi pod since i imported the car probably about 18 months now. Just wondeirng if i should replace it? Car has done almost 30k kms.... plus im going to throw a pfc and tomei pump in shortly and get it tuned, but yeah regardless of that as a general question... how often?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/196750-how-often-to-replace-air-filter/
Share on other sites

just replaced my HKS air filter (on the pod) after 35k .. on the back of the packaging it says 6k-10k replace,, if i did that i would buy a filter every month and a half :)

I reckon after 25k if overly worried.. 6k seems too soon.

my 2c

-JD

oiled foam filters normally need cleaning every 5k. the HKS oiled foam ones are known to be quite poor at filtration so i'd ditch it anyway.

nissan service schedule says 20k for air filter replacements - using the standard paper type of course.

apexi power intakes are "maintenance free" - when they start to look scungy you just buy a new one. certainly they filter the best out of the group, according to this old chestnut:

http://www.mkiv.com/techarticles/filters_test/2/

The "best" air filters are debatable.

Out of the reviews I've seen, Apexi, K&N & 3A Racing filters are the pop. As to which is better is debatable, and which ever you use is your personal choice.

I myself use a K&N Filter. Costs the same as an Apexi pod but at least its washable/reusable. $20-$30 bucks for a cleaning kit which will last you 5 oddish or so cleans. Beats paying $80 for a new pod every time.

As for ones who say K&N are AFM killers, its a bunch crapola. Mine has worked fine from the day I bought it and it has gone though 2 cleans already. Just don't over oil it and bobs your mothers brother. If it does get some oil on it, electrical contact cleaner is your friend.

I have two apexi filters... I had the first one on my 34GTT RB25DET(Neo) from 11/2004 till 7/2006.. then I swapped my engine for a RB26DETT. My roommate totaled his R33 gtst so I took his used apexi filter and my used apexi intake and put them on the RB26DETT. It's now 12/2007 and I still have yet to change my filters. Every once and a while when I'm washing out the engine bay I'll take'em off and blow them out real good with an air compressor... nothing more. they still look fairly new but I'm going to replace them in a few months anyways.. I'm getting two new Apexi filters and will probably keep them for another 4 years or so. They say it lasts a lifetime... It probably does if you maintain it real good.

You can order all kinds of filters thru www.rhdjapan.com. they ship to the US and they ship fast. prices are good. If you want the Apexi filter you might have to wait because Apexi went bankrupt and their products are out of stock... gotta wait in line.

I thought apexi going out of business was a false rumour. Or they were in trouble and things are looking fine now They certainly seem to be pumping out the PowerFC's as per normal.

I just bought secondhand Apexi pods so i too am interested in cleaning. I thought air compressor at a lowish setting would do the trick

they are not like k&n you cant clean and reoil type thing, they are not "the last air filter you will ever buy". they are a filter that needs to be replaced when it gets clogged. if you blow it out every 6 months or so, it will not get clogged :wave: however, the more dirt on it, probably the better the air is filtered. happens with air handling units in hotels, or even at home. it gets finer and finer gaps until it is clogged and you need to clear it out or replace.

About 2 months ago I tried to order some apexi pods from japan... but their stock is low and it would take a while. A friend of mine in japan told me that apexi got sued by nissan because of the power fc... not really sure about the details or anything. Apexi is still alive but barely. My friends auto store in japan is pumping out madd power fc's just like everyone else. I think that's one of the reasons why apexi is still hanging on.

All that was info I heard about 2 months ago... it might be different now.

Apexi makes a good filter that'll last a long time if you take care of it... just clean it out everyother or third wash and you should be more than fine. I clean mine every couple of months or so (i'm lazy) but they're still in good condition.

oiled foam filters normally need cleaning every 5k. the HKS oiled foam ones are known to be quite poor at filtration so i'd ditch it anyway.

thats why you get the new dry 3 layer ones.. they are not oil based and last longer, i.e. you can wash them without removing something that should be there..

cheers.

i got mine from nengun

  • 2 weeks later...

i have a blitz pod on my m35 stagea and i'm looking to get a new one. anyone no if i can just swop to an apexi filter with out buying the whole induction kit. i.e. will the apexi filter fit on the blitz intake?

Panel filters or the Apexi power intake filters are good, both paper element filters.

The foam filters tend to break and deteriorate over time, which means half of it ends up in your engine if you don't change the elements it on a regular bases.

Apexi power intake has been known to be one of the best filtering pod filters around. Very Good quality design, and lasts a long time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...