Jump to content
SAU Community

Recommended Posts

Have an apexi pod since i imported the car probably about 18 months now. Just wondeirng if i should replace it? Car has done almost 30k kms.... plus im going to throw a pfc and tomei pump in shortly and get it tuned, but yeah regardless of that as a general question... how often?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/196750-how-often-to-replace-air-filter/
Share on other sites

just replaced my HKS air filter (on the pod) after 35k .. on the back of the packaging it says 6k-10k replace,, if i did that i would buy a filter every month and a half :)

I reckon after 25k if overly worried.. 6k seems too soon.

my 2c

-JD

oiled foam filters normally need cleaning every 5k. the HKS oiled foam ones are known to be quite poor at filtration so i'd ditch it anyway.

nissan service schedule says 20k for air filter replacements - using the standard paper type of course.

apexi power intakes are "maintenance free" - when they start to look scungy you just buy a new one. certainly they filter the best out of the group, according to this old chestnut:

http://www.mkiv.com/techarticles/filters_test/2/

The "best" air filters are debatable.

Out of the reviews I've seen, Apexi, K&N & 3A Racing filters are the pop. As to which is better is debatable, and which ever you use is your personal choice.

I myself use a K&N Filter. Costs the same as an Apexi pod but at least its washable/reusable. $20-$30 bucks for a cleaning kit which will last you 5 oddish or so cleans. Beats paying $80 for a new pod every time.

As for ones who say K&N are AFM killers, its a bunch crapola. Mine has worked fine from the day I bought it and it has gone though 2 cleans already. Just don't over oil it and bobs your mothers brother. If it does get some oil on it, electrical contact cleaner is your friend.

I have two apexi filters... I had the first one on my 34GTT RB25DET(Neo) from 11/2004 till 7/2006.. then I swapped my engine for a RB26DETT. My roommate totaled his R33 gtst so I took his used apexi filter and my used apexi intake and put them on the RB26DETT. It's now 12/2007 and I still have yet to change my filters. Every once and a while when I'm washing out the engine bay I'll take'em off and blow them out real good with an air compressor... nothing more. they still look fairly new but I'm going to replace them in a few months anyways.. I'm getting two new Apexi filters and will probably keep them for another 4 years or so. They say it lasts a lifetime... It probably does if you maintain it real good.

You can order all kinds of filters thru www.rhdjapan.com. they ship to the US and they ship fast. prices are good. If you want the Apexi filter you might have to wait because Apexi went bankrupt and their products are out of stock... gotta wait in line.

I thought apexi going out of business was a false rumour. Or they were in trouble and things are looking fine now They certainly seem to be pumping out the PowerFC's as per normal.

I just bought secondhand Apexi pods so i too am interested in cleaning. I thought air compressor at a lowish setting would do the trick

they are not like k&n you cant clean and reoil type thing, they are not "the last air filter you will ever buy". they are a filter that needs to be replaced when it gets clogged. if you blow it out every 6 months or so, it will not get clogged :wave: however, the more dirt on it, probably the better the air is filtered. happens with air handling units in hotels, or even at home. it gets finer and finer gaps until it is clogged and you need to clear it out or replace.

About 2 months ago I tried to order some apexi pods from japan... but their stock is low and it would take a while. A friend of mine in japan told me that apexi got sued by nissan because of the power fc... not really sure about the details or anything. Apexi is still alive but barely. My friends auto store in japan is pumping out madd power fc's just like everyone else. I think that's one of the reasons why apexi is still hanging on.

All that was info I heard about 2 months ago... it might be different now.

Apexi makes a good filter that'll last a long time if you take care of it... just clean it out everyother or third wash and you should be more than fine. I clean mine every couple of months or so (i'm lazy) but they're still in good condition.

oiled foam filters normally need cleaning every 5k. the HKS oiled foam ones are known to be quite poor at filtration so i'd ditch it anyway.

thats why you get the new dry 3 layer ones.. they are not oil based and last longer, i.e. you can wash them without removing something that should be there..

cheers.

i got mine from nengun

  • 2 weeks later...

i have a blitz pod on my m35 stagea and i'm looking to get a new one. anyone no if i can just swop to an apexi filter with out buying the whole induction kit. i.e. will the apexi filter fit on the blitz intake?

Panel filters or the Apexi power intake filters are good, both paper element filters.

The foam filters tend to break and deteriorate over time, which means half of it ends up in your engine if you don't change the elements it on a regular bases.

Apexi power intake has been known to be one of the best filtering pod filters around. Very Good quality design, and lasts a long time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I didn't know about induction heaters but checked them out and they look awesome but too pricey for the occasional job like this. And I'm too nervous to take a flame anywhere near there as the petrol tank is so close, although I was intrigued with the crayons suggestion 😁 I filled a coke bottle lid with penetrating fluid and raised it on the jack so the nut was submerged in it all night. Then went in with a tiny cold chisel and got it almost to the point of splitting but not quite (I didn't want to damage the bolt threads). Then I hammered a socket back on and gently worked it until I felt movement. And it's off 😀
    • I should. But it already uses too much fuel for a daily. You might note my recco for engine chnages are almost exclusively to people who have it as a weekender/summer car. I don't even have room to keep the spares for this one, let alone another car.
    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
×
×
  • Create New...