Jump to content
SAU Community

Recommended Posts

  • 6 months later...
Paul! Do you still have tha Apexi led flashing gizzmo that I won ages ago?? lol

Yes I do, I can drop it round after the long weekend, PM me your address again.

Sorry about that Charlie.

  • 1 month later...

Im unable to edit the original post to say the inj are sold, so except the INJ if there is no line though it I have it.

Thanks

This is whats left. with a price drop

Apexi PFC Boost controller (as per pic) $100

Turbo’s STD Balled R34 GTR VspecII 20,000km old, pair $650

CAM’s STD R34 GTR VspecII 20,000km old, pair $300

(Great upgrade for non vspec apparently 255 deg instead of normal 250 and GTT')

ECU STDR34 GTR VspecII 20,000km old $100

AFM STD R34 GTR VspecII 20,000km old, pair $75 1 is slightly damaged with a cracked and repaired hole, but working fine

HKS Metal air pods from R34 GTR pair $100

Boost Solenoid STD R34 GTR VspecII 20,000km old $20

AFM STD R33 single, please try before you buy $35

Fuel pump R32 GTR $140

Aircon/climate control Module R32 GTR $100

Variable cam sprockets R32 GTR pair $80

HKS air pods (Plastic from R32 GTR pair $60

AFM STD R32 GTR pair 80,000km $60

Front strut brace R32 GTR $50

Variable cam sprockets R32 GTR single exhaust $50

Turbo R32 GTS working $100

Turbo R32 GTR BLOWN, needs rebuild single only $50

Turbo SR20 NEW and not used $400

Fatz bargain basement!

I know you want them Fatz, just because they are cheap!

Sump baffle/de-fuser STD R34 and R32 GTR each $40

Spark plugs iridium heat range 6, 5,000km old 6 units $30

Horn R32 GTR $20

Thermostat 76Deg R32 GTR $20

  • 2 weeks later...
  • 1 month later...

OK,

R34 Turbo's, AFM and ECU sold. Also R32 Cam sprockets

Apexi PFC Boost controller (as per pic) $100

CAM’s STD R34 GTR VspecII 20,000km old, pair $250

(Great upgrade for non vspec apparently 255 deg instead of normal 250 and good for the GTT)

HKS Metal air pods from R34 GTR pair $100

Boost Solenoid STD R34 GTR VspecII 20,000km old $20

AFM STD R33 single, please try before you buy $35

Fuel pump R32 GTR $100

Aircon/climate control Module R32 GTR $100

HKS air pods (Plastic from R32 GTR pair $60

AFM STD R32 GTR pair 80,000km $60

Front strut brace R32 GTR $50

Variable cam sprockets R32 GTR single exhaust $50

Turbo R32 GTS working $100

Turbo R32 GTR BLOWN, needs rebuild single only $50

Turbo SR20 NEW and not used $400

Fatz bargain basement!

I know you want them Fatz, just because they are cheap!

Sump baffle/de-fuser STD R34 and R32 GTR each $40

Spark plugs iridium heat range 6, 5,000km old 6 units $30

Horn R32 GTR $20

Thermostat 76Deg R32 GTR $20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...