Jump to content
SAU Community

Recommended Posts

  • 6 months later...
Paul! Do you still have tha Apexi led flashing gizzmo that I won ages ago?? lol

Yes I do, I can drop it round after the long weekend, PM me your address again.

Sorry about that Charlie.

  • 1 month later...

Im unable to edit the original post to say the inj are sold, so except the INJ if there is no line though it I have it.

Thanks

This is whats left. with a price drop

Apexi PFC Boost controller (as per pic) $100

Turbo’s STD Balled R34 GTR VspecII 20,000km old, pair $650

CAM’s STD R34 GTR VspecII 20,000km old, pair $300

(Great upgrade for non vspec apparently 255 deg instead of normal 250 and GTT')

ECU STDR34 GTR VspecII 20,000km old $100

AFM STD R34 GTR VspecII 20,000km old, pair $75 1 is slightly damaged with a cracked and repaired hole, but working fine

HKS Metal air pods from R34 GTR pair $100

Boost Solenoid STD R34 GTR VspecII 20,000km old $20

AFM STD R33 single, please try before you buy $35

Fuel pump R32 GTR $140

Aircon/climate control Module R32 GTR $100

Variable cam sprockets R32 GTR pair $80

HKS air pods (Plastic from R32 GTR pair $60

AFM STD R32 GTR pair 80,000km $60

Front strut brace R32 GTR $50

Variable cam sprockets R32 GTR single exhaust $50

Turbo R32 GTS working $100

Turbo R32 GTR BLOWN, needs rebuild single only $50

Turbo SR20 NEW and not used $400

Fatz bargain basement!

I know you want them Fatz, just because they are cheap!

Sump baffle/de-fuser STD R34 and R32 GTR each $40

Spark plugs iridium heat range 6, 5,000km old 6 units $30

Horn R32 GTR $20

Thermostat 76Deg R32 GTR $20

  • 2 weeks later...
  • 1 month later...

OK,

R34 Turbo's, AFM and ECU sold. Also R32 Cam sprockets

Apexi PFC Boost controller (as per pic) $100

CAM’s STD R34 GTR VspecII 20,000km old, pair $250

(Great upgrade for non vspec apparently 255 deg instead of normal 250 and good for the GTT)

HKS Metal air pods from R34 GTR pair $100

Boost Solenoid STD R34 GTR VspecII 20,000km old $20

AFM STD R33 single, please try before you buy $35

Fuel pump R32 GTR $100

Aircon/climate control Module R32 GTR $100

HKS air pods (Plastic from R32 GTR pair $60

AFM STD R32 GTR pair 80,000km $60

Front strut brace R32 GTR $50

Variable cam sprockets R32 GTR single exhaust $50

Turbo R32 GTS working $100

Turbo R32 GTR BLOWN, needs rebuild single only $50

Turbo SR20 NEW and not used $400

Fatz bargain basement!

I know you want them Fatz, just because they are cheap!

Sump baffle/de-fuser STD R34 and R32 GTR each $40

Spark plugs iridium heat range 6, 5,000km old 6 units $30

Horn R32 GTR $20

Thermostat 76Deg R32 GTR $20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...