Jump to content
SAU Community

Recommended Posts

Hello everyone , im looking at organising a coffee meet then a professional photo shoot by Jon Wallis Photography to come and take some snaps of our prides and joy + whoever that attends as this years memories !

Please note This isnt only a Skyline Event Any Make Models are welcome

Plan -

Meet for PHOTO around 7pm at the latest ! (See Addy Above)

Coffee Cruise down to below location after photoshoot

Mt Gravatt Cafe Bar Restaurant

Shop 1 1422 - 1428 Logan Rd

MT GRAVATT

Please note you will need to make a U Turn at the lights opp Mt Gravatt lookout turnoff , Car park is under cover behind the shops entry is between the Chemist and 24/7 store next to coffee club

Cruise to a suitable point picked by our photographer get shots taken etc cruise back to a dinner location , City (Valley)?? depends where i can get bookings

i need to ensure for both photos and dinner resavations numbers on here by wensday afternnoon at the latest

Post away whoevers keen to come for this etc...

Everyone is welcome to join there are no limit to number of attendees etc

Cheers

Vish

GJ Photography - www.gjphoto.biz

Photoshoot location :- Noble Court (Hyperdome) Northend logan

15th Dec This sat be there on time please for those who want to get some good pictures cost is 5 bucks per car and this will be around 10 -30 shoots per car he will be bringing his own lighting etc will be a stage setup Cruise after photo shootPlease be on time to photo location Thanks

22nd december again same location 7-7.30pm for those who want to come this date cost is 5 bucks per car as previously

Jan 28/29 East coast dyno day he will be there to take pics and also at nite anytime after 6pm cost for nite shoots will be around the same

Attendees 15th Dec

-MRR34

-Miz_Niz

-Long33

-Bunta / Anna boo boo

-Pear

-devils_advocate

-Oblivion

Please also Post if you are keen for Dinner @ Zafron (New Farm) This is for the 15th/ 22nd Dec

Please Note since this is a private area no skidding loud stereos will be tolerated by the Photograper as his brother owns the premises Thanks

Instructions on getting to location

Take Hyperdome EXIT

Turn First LEFT (First Exit)

At Lights Go Straight

First Right

First Left

Its Past Neutomatics Building

Edited by 53XYN
Link to comment
https://www.sau.com.au/forums/topic/196866-final-07-coffee-photo-shoot-meet/
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Dates are either 15th Sat or the 22nd Sat .... as for Jan unforantly ive asked the photographer he did say his booked out for other commitments till mid feb.. when are you getting your car back in jan ? i might work something out with him and get back to you so far those are the 2 dates let me know which one suits who .. will go ahead for the date with majority of votes

If we come it will only be on the 15th, the R32 will be gone by the 22nd, it's leaving Brisbane for Cairns next monday :P so sad but it's been a long time coming.

Anyway once I know when it's on i'll let you know :)

Anna xo

heres another mixxed response for ya vish- 15th is good, i could stay late cos im off the next day, but id be late gettin ther as i dnt finish work till 6, 22nd good as i have the day off so id be early as, however it is the misses and I's anniversaire. (spose we could do sumtin durin the day!! lol)

Dates are either 15th Sat or the 22nd Sat .... as for Jan unforantly ive asked the photographer he did say his booked out for other commitments till mid feb.. when are you getting your car back in jan ? i might work something out with him and get back to you so far those are the 2 dates let me know which one suits who .. will go ahead for the date with majority of votes

I will get my car back in the 2nd or 3rd week in January....hopefully the second.

alrite ive managed to sort this out with Jon (photographer)

15th Dec This sat 6.30-7pm be there on time please for those who want to get some good pictures cost is 5 bucks per car and this will be around 10 -30 shoots per car he will be bringing his own lighting etc will be a stage setup

22nd december again same location 7-7.30pm for those who want to come this date cost is 5 bucks per car as previously

Jan 28/29 East coast dyno day he will be there to take pics and also at nite anytime after 6pm cost for nite shoots will be around the same

i will edit my first post and add attendees for people comming on either dates

Cheers

Vish

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...