Jump to content
SAU Community

Wrapping Dash In Carbon Fibre

R33_Rob

By R33_Rob,
in Exterior & Interior Styling

 Share

Recommended Posts

R33_Rob Proficient

R33_Rob

Posted
Posted

Hi guys

I saw a massive carbon fibre sticker yesterday at autobarn and was wondering if i should attempting to wrap my S2 R33 GTST dash in it.

Would i need to sand the dash back cause the series 2 dash isnt completely smooth?

Has anyone got any experience with this?

Link to comment
https://www.sau.com.au/forums/topic/197168-wrapping-dash-in-carbon-fibre/
Share on other sites
cheez Mentor

cheez

Posted
Posted

the other option you have is to get some1 to lay a single ply of carbon fibre over the dash in a wet lay up style and let it cure onto the dash. will give u a better and realistic finish as people (like myself) can pick apart a fake finish to the real deal but it would be much harder to pick a full carbon dash to a single layer carbon dash coz at face value without removing it, it would look exactly the same.

Trav33 Mentor

Trav33

Posted
Posted

I've seen a dash + the associated centre console+door trim parts which had been done professionally, similar to modicoat, and it looked awesome. Easy to keep clean, not too glarey, but i imagine it'd be quite expensive to get done!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...