Jump to content
SAU Community

Recommended Posts

hi all, jus wondering are the stock side mount intercoolers in the R34 GTT's any bigger thant he side mounts in the r33 S2?

and are they any better?

also, will they fit on a r33 s2?

jus curious for the answers of these questions peeps...thanx for ur help

Cheers

Matt

im pretty sure all series of the 33's use the same cooler and yes the 34's are taller and thicker which means an increase in working capacity. they are a direct bolt on. I have one on my series 1.5 if that makes any difference and i think its a good simple upgrade.

Don't waste your time. The amount of messing around required to fit it plus the fact that everyone charges way too much for them means you're better off getting a front mount.

How do you figure that? They're a direct bolt on and they're frequently sold on these forums for around $100-150.

Edited by ricsvtr
How do you figure that? They're a direct bolt on and they're frequently sold on these forums for around $100-150.

Doesn't the cold pipe come out of the opposite side of the cooler compared to the R32/R33?

My mate has done this... it's a direct bolt on as the R34 side-mount is only a fraction larger... however, unnoticeable difference imo - although it is a cheap upgrade - I would spend the buck and get a front mount - performs better and looks better too.

Installation will cost you around $70 if that and the intercooler themselves can be picked up from sources on here or wreckers for around $250 from memory - I was going to do this but decided to spend the cash for a front mount. Up to you mate - good luck.

Seriously, have any of you done this? One of the people saying not to do it drives an S14 LOL. if you are sober, hour job to do, 23% increase in size/flow... i had no rise in boost at the plenum but alot more response read this how-to: http://www.skylinesaustralia.com/forums/R3...age-t69501.html

if aiming for ~210rwkw, i would do it, and they are in demand, so i would do it even if you change later. better than cheap chinese FMIC's, legal(er), and doesn't restrict flow to your radiator so better over summer. I found less eaily heat-soaked than the 33(stagea) cooler, so i reccommend it.

-Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...