Jump to content
SAU Community

Recommended Posts

just wondering if anyone knows if the oasis branded falvoured drinks are still sold anywhere and if so where abouts?

i know Dr. Pepper is still sold at ezy plus along with cherry coke and other assorted quirky soft drinks that australia hates but i love

anyone know what happened to oasis thO??

or jolly ranchers for that matter!?

Link to comment
https://www.sau.com.au/forums/topic/197645-oasis-drinks/
Share on other sites

try the pommy lolly shops at gosnells railway markets or the lolly shop at malaga markets they might have it as they sell o/s drinks

Malaga Markets don't sell these unfortunately. :( They stopped selling these ages ago. I bought my last one at the deli shop there about a year ago. So yeah if anyone knows a place that still sells them let us know, but im pretty sure that this product is discontinued and schweppes no longer make them.

Think its goodbye forever ;)

Link to comment
https://www.sau.com.au/forums/topic/197645-oasis-drinks/#findComment-3533627
Share on other sites

you can also get dr pepper from 'best of the british' shops - there is one in riverton forum

and the english sweet shop in the fremantle markets has a little fridge full of cool drinks like cherry vanilla coke.

Edited by Lucy in the Sky
Link to comment
https://www.sau.com.au/forums/topic/197645-oasis-drinks/#findComment-3557374
Share on other sites

  • 2 months later...


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...