Jump to content
SAU Community

Recommended Posts

I've got a 94 white one for sale have a look at my thred

yeah i did mate, you need a picture...i'm not looking at anything straight away as i don't have the funds and still have my other car...

i bought mine 3 months ago. i looked for smoke after 4 grand, kms leaks/ drips under engine/gearbox. paid 21.500 remember when buying a gtr tho there is maintenance maintenance and more maintenance :(

also how much would you expect a stocker r32 GTR to be going for? do you reckon i could pick one up for about 15k?

yes but thats definately towards the low side...

(like anything they vary according to cond etc)

normally around the 20k mark these days i think

If I were to purchase a 32 GTR, I wouldn't look at anything below $21k - $22k.

I'm not saying that there's no GTR under $20k that's good, but there's just a higher chance of them being in need of a rebuild soon, or things need replacing. If you find one for $17k that passes all the major $$ spending test, go right ahead and purchase it!

i bought mine recently for 20k, bargained down from 23k.

for a roadworthy it needed 1 new brake disk(replaced all 4)

and needs the engine mounts gearbox mounts and tailshaft center bearing are on the way out. but nothing to stress about just yet.

all up on the road i spent 21k on it, not including rego etc.

i bought mine recently for 20k, bargained down from 23k.

for a roadworthy it needed 1 new brake disk(replaced all 4)

and needs the engine mounts gearbox mounts and tailshaft center bearing are on the way out. but nothing to stress about just yet.

all up on the road i spent 21k on it, not including rego etc.

i guess thats not overly bad is it...i'm thinkin maybe i should save up a bit more money before i consider buying one...i was hoping i could get out of it for under $20k..but it looks like if i spend under 20 on the car..i'll be spending more on repairs...

My advice is buy private, all the 32 GTRs that I looked at in importers yards for comparison sake when buying mine where absolute crocks of shit. This was at various importer yards around Melbourne, someone like power play imports though usually import quality or reasonable nick cars (but also on the more pricey side of things as well).

http://www.powerplayimports.com/

So checkout the for sale section of this forum and carsales.com.au in the private seller section.

Cheers!

Gagz

PS...The R32 GTR for $27,000 about two fifths of the way down the page is one I was looking at when in the market, looks very neat and probably a pretty good price if you could get them down a grand or two. Good luck in the hunt >_<

http://www.powerplayimports.com/includes/c...php?make=Nissan

Edited by R31 Gagz

i have a mint r32 gtr which i brought over from japan and got a 2000 dollar service done by mercury motosports in brisbane. Body, mechanics, interior are all perfect. Not 1 dent. had a compression test and leakdown test with exactly the same on all 6 cyl. I wouldn't sell mine for less than 22k. Sure you can get them for 17k but parts are not cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...