Jump to content
SAU Community

Recommended Posts

Before I buy my 19x8.5 and 19x9.5's does anyone know if they are legal in Western Australia? I know everyone puts them on but if their legal or not im just clueless. Their going on a R34GT.

Reason for me stressin is incase im in a accident and insurance wont cover anything i heard?

Link to comment
https://www.sau.com.au/forums/topic/198322-are-these-rims-legal/
Share on other sites

From WA DPI:

Alternative road wheels

Alternative road wheels are permitted under the following conditions :

Rim width must not exceed the maximum rim width specified by the manufacturer by more than 25mm (1") (for passenger vehicles manufactured after 1st January 1973, the manufacturers rim width shall be taken as that specified on the tyre placard).

In any event, rim width shall not exceed 177.8 mm (7") unless specified by the manufacturer as standard equipment for the vehicle in question. No increase in rim width is permitted for vehicles fitted with original equipment rims in excess of 177.8 mm (7") width.

The wheel is contained completely within the body work of the vehicle which includes acceptable flares.

The wheel does not foul any part of the body or suspension under all conditions of travel

The vehicle handling is not impaired in any way.

The tyre to rim fitment must be in accordance with the Tyre and Rim Association Manual.

Rim diameters must be the same as specified by the manufacturer.

The wheel must be one designed for use with the vehicle with respect to bolt pitch circle and wheel nut tapers

The track must not be increased by more than 25mm (1") over the maximum specified by the manufacturer.etc.

All wheels must be the same size, profile and bolt pattern.

Vehicles required to comply with Australian Design Rule 24, "Tyre & Rim Selection" must continue to comply with this Design Rule (contact the Department of Transport and Regional Services for more details).

The fitment of so called "plus one" and "plus two" and tyres is acceptable providing :

the overall diameter of the large rims fitted with the lower profile tyres do not exceed the overall diameter

all tyres and rims fitted to the vehicle are of the same size and profile

with the exemption of item (f), the tyres and rims are in conformity with the requirements specified above in items (a) to (j).

Reducing the wheel track less than the original manufacturers specification is not permitted, as this may reduce vehicle stability.

So on your GTT - technically no on a number of fronts.

the law actually changed at the start of the year.

you are allowed up to 1.3x the largest factory width (without extending the track over 25mm, and protruding from the guards), and you are allowed any diameter as long as the rolling diameter does not change

however you are not allowed staggered sizes unless it was a factory option, then you can go 1.3x whatever the front has at the front, and 1.3x whatever the rear has at the rear.

so unless you own a supra or a porsche, you cant use those rims...legally :D

best bet is to email the dpi themselves and wait til u get a reply from them about it

i had the same issue with cops trying to sticker me for pod filters til i showed them the dpi email stating that they are legal

[email protected] < email addy

Customer Contact Centre on 13 11 56 (within WA) or 08 9427 6404 (outside WA). <phone

Edited by gazza750
+1 on the uglyness of the wheels. They would suit the old school type of cars, but if that's what you want then go for it. You'll be the one driving it around all day long. Not us.

hmm not sure whats goin on here.. i started the topic and those arent my rims, maybe that guy had same problem? the rims im about to purchase are 19x8.5 and 19x9.5, his look fatter. but yeh i agree with everyone, pretty munted wheels. As for all the advice i might give the dpi an email as well cheers Gary!

hmm not sure whats goin on here.. i started the topic and those arent my rims, maybe that guy had same problem? the rims im about to purchase are 19x8.5 and 19x9.5, his look fatter. but yeh i agree with everyone, pretty munted wheels. As for all the advice i might give the dpi an email as well cheers Gary!

Okay, I see what's happened. When people were asking for pictures, they were asking for yours (MellowYellow's), but out of nowhere full house turned up and posted pictures of his wheels (or some other person's wheels) and people just assumed they were yours (MellowYellow).

I think that's what happened. Ah who cares. :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...