Jump to content
SAU Community

Recommended Posts

was tis deliberately done or missfiring?

cos when i first got the car it was misfiring. and one day a fren was following me from behind and n rev the car around 4000-4500 rpm it misfired. saw a huge cloud of black smoke.

my fren told me there were flames n then the black smoke came out like the clip.

will tis cause any damages to the car?

according to SAU forum n mechanics its the coilpacks but i havent replace it yet.

deliberately... similar to antilag system, helps to reduce lag

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

deliberately... similar to antilag system, helps to reduce lag

my car didnt have the antilag system or beeR rev limiter... there was no popping sound just the usual sound when ur car misfirires.

y does tis happens. i did rev the car to the redline though...

my car didnt have the antilag system or beeR rev limiter... there was no popping sound just the usual sound when ur car misfirires.

y does tis happens. i did rev the car to the redline though...

if your car is missfiring... they most likly it will be your coilpacks or maybe try and regap ur plugs down to 0.8 or 0.6

Mine does it under the same conditions too Brockaz, well pops loudly at least, more often than not the fuel gets ignited at the front of the exhaust and I just get a bang with no flame. When it ignites at the back I get a 1-2ft flame apparently :P only makes a small *whop* when it flames though :P

I have been on the receiving end of a Bee*R limiter in the workshop.. 26 in a gts4, was standing on the back left of the car talking to someone when I heard the engine start to rev.. glanced at the exhaust pipe then BANG BANG BANG it hit the Bee*R limiter.. my left ear was ringing for several hours after :D

whats the fuel eco on a tune like that?

Bad.

I don't use the over-run feature much unless I've been hammering it and want to cool temps, so fuel economy is already poor.

Obviously the fuel economy on decel is bad, 200-250kms from a tank if using it regularly.

Can get about 350kms from a tank if I baby it and keep off the throttle on decel.

Bad.

I don't use the over-run feature much unless I've been hammering it and want to cool temps, so fuel economy is already poor.

Obviously the fuel economy on decel is bad, 200-250kms from a tank if using it regularly.

Can get about 350kms from a tank if I baby it and keep off the throttle on decel.

what ecu are you running ?

I would say the stock turbz will be fine with the BeeR limiter. Its more your engine taking punishment if the red line is set higher. Don't take my word for it though, but I don't see how it would damage your turbo.

what ecu are you running ?

Power FC

It's not technically an over-run feature, it's just tuned on de-cel.

Same way mine runs rotational, not technically rotational, but tuned with a fuel cut at 1000rpm and fuel recovery at 900rpm.

I would say the stock turbz will be fine with the BeeR limiter. Its more your engine taking punishment if the red line is set higher. Don't take my word for it though, but I don't see how it would damage your turbo.

DO NOT listen to this.

BeeR limiter will make short work of your turbo. It's an ignition cut rev limiter. Think about what's happening, the ignition is being cut, fuel is still being supplied to the cylinder but not ignited, it travels out the exhaust port and into the turbo where the heat can ignite it.

It's the equivilent of an explosion in your turbo, similar to how antilag works, except the unburnt fuel is not deliberately ignited on its way through the exhaust port.

yer i was guna wait till i upgrade my turbo to a non ceramic item, was just curious as to whether u cud or not as some ppl say yes some ppl say no, best to be on the safe side i guess an not risk it

thanks for the info tho mate :D

Power FC

It's not technically an over-run feature, it's just tuned on de-cel.

Same way mine runs rotational, not technically rotational, but tuned with a fuel cut at 1000rpm and fuel recovery at 900rpm.

cool, im guessing xspeed tuned it, be interested to see how a tune like that would go on my r33. shame you can't change the maps on the pfc unless you have the software and cable. would love to see some vids of it in action ur gtr was already a animal.

cool, im guessing xspeed tuned it, be interested to see how a tune like that would go on my r33. shame you can't change the maps on the pfc unless you have the software and cable. would love to see some vids of it in action ur gtr was already a animal.

cheers mate!

Yeh Ant tuned it, but it came over with the rotational/decel tuned already.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...