Jump to content
SAU Community

Recommended Posts

I have a near new (and i actually mean it, unlike those filthy looking turbos that people try to flog off as "only 500k's"):

GT35R - 0.63 Exhaust Housing

I would like to trade (and cash adjustment, pending condition) if possible. If someone has a Trust/Greddy T67 for sale on its own, i might buy it anyway, but would prefer to trade.

Link to comment
https://www.sau.com.au/forums/topic/198986-trustgreddy-t67/
Share on other sites

unless you can get it in a small-ass exhaust housing

it's going on 1.6 :)

What car? What power are you looking to make? I've got a Garret 2876R 440HP Internal Wastegate turbo that maybe good for that, was on my previous S15. $850. It made 255kw atw on my SR20DET on 19-20psi

Link to comment
https://www.sau.com.au/forums/topic/198986-trustgreddy-t67/#findComment-3552987
Share on other sites

4AGE

And i wish to keep it trust/greddy .. i want to keep it all jap :) and i dont trust HKS for a variety of previous experiences

so TD06-20G, TD06-25G, T67, or possibly, just possibly T78

If it is for 1.6 and you want Trust brand, I would go a Trust TD05-16G or TD05 "Big 16G" from an Evo 1-3, they are good for 200kw atw in an Evo 1-3 with very good powerband. A TD06-20G is still gonna be fairly laggy on a 1.6. I would also forget about doing a 25G on a 1.6, they are still laggy on a 2 litre..

The Evo TD05-16G is essentially a Trust turbo also, as Trust use all Mitsubishi parts for their turbos.

Another good option would be a T28 from an S15 if you want good response/power.

Both of those turbos can be found for under $500 2nd hand in good condition, which would be a much better for your application. Or even a Twin scroll turbo from an Evo 4-9. They are also a TD05 Big 16G, but twin scroll and slightly more powerful, with Evo 9 being the biggest of all the stock Evo turbos.

Link to comment
https://www.sau.com.au/forums/topic/198986-trustgreddy-t67/#findComment-3555652
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
    • Any idea where I can get genuine MAF apart from used ones? I can't find any only for GTRs and unfortunately that price is not in my budget 🤣 I might gap my plugs down and put my splitfires in, they were only in for a year or so before I started the rebuild 
×
×
  • Create New...