Jump to content
SAU Community

Mine's 2009 Nissan Gt-r (r35) Performance Parts Photos & Info!


Recommended Posts

Taken from GTChannel - http://www.gtchannel.com/content.php?cid=13396

GTChannel Exclusive A mere 3 weeks since the all new 2009 GT-R was delivered to dealerships in Japan, the top premier Nissan tuner, MINE'S has already come out with a line up of performance aftermarket parts for the GT-R. Some how the math doesn't add up how in the hell they pulled it off so fast but lets just imagine that Mine's prez Niikura-san made his employees work day and night without sleep to get these products developed quicker than anyone else in the world. This also means that by the time the GT-R hits the streets States side, Mine's will already have parts available for anyone who wants to go faster than the other guy in line.

This is a GTChannel exclusive as these photos are not even on the official Mine's website, mines-wave.com.

r35titaniumexhaust.jpg

Mine's Silence -VX Pro Titan II exhaust with the Super CatalyzerII.

supercatII.jpg

Mine's Super CatalyzerII.

r35bigrotordia400Front.jpg

Mine's Front Brake Rotor Kit Φ400mm 24 slits.

r35bigrotor400diaR.jpg

Mine's Rear brake rotor kit  Φ400mm 16 slits .

In this photo you can get a sneak peak of their suspension system which is currently in development. Mine's Niikura-san has also stated they will release the VX-ROM (tuned ECU) and the VX-Air filter.

Prices of these kits are still not disclosed. Hopefully we will get them too you soon.

- New titanium cat back exhaust (Silence-VX Pro Titan II exhaust)

- New cat convertors (Super Catalyzer II)

-They have also confirmed they will be coming out with a VX Rom (ECU upgrade) and a VX air filter upgrade

how much more hp will gain? lol

looks like the battle between MCR and Mines is hotting up, both are doing their exhaust at the moment. I think there should be a race every 4 month to test their wares.

of course their fast out with this stuff. Nissan would have either given them a GTR to work with aaaages ago or given them detailed schematics/blueprints, whatever of the car to develop stuff like exhausts,

There's been a history of Nissan working with tuners/developers, Mines would have been at it for a while

of course their fast out with this stuff. Nissan would have either given them a GTR to work with aaaages ago or given them detailed schematics/blueprints, whatever of the car to develop stuff like exhausts,

There's been a history of Nissan working with tuners/developers, Mines would have been at it for a while

is this true? didn't know that...other then nissan maybe a lot of other manufactures do this also?

bad example, but Altia had the R34 before it was released to develop the 'aero kit' options for the when the car was released. You could buy the parts themselves direct from 'Altia' but most people for some reason know it as a the 'nismo' option kit; when in fact the Nismo kit is entirely different.

Autech, i believe, have had cars early and worked in conjunction with Nissan before as well.

These cars went on sale in japan last month only, you think you could develop parts for such a car as the new GTR AND to the standard of Mines, in a few weeks?? Mines and MCR, and who knows who else, Top Secret, HKS, would have had some GTR's early i would imagine. Mines obviously had 1 early

In this case i would have to call bs. I wouldnt doubt for a second that mines could make an exhaust in a few weeks.

I mean we are talking about mines here, and an exhaust is pretty simple to make. Its not like 10000 hours would have gone into it etc

In this case i would have to call bs. I wouldnt doubt for a second that mines could make an exhaust in a few weeks.

I mean we are talking about mines here, and an exhaust is pretty simple to make. Its not like 10000 hours would have gone into it etc

You'll be suprised matey. I have done extensive research and consideration on the japanese movement towards quality after WWII led by people such as Deming.

A company like Mines is not just like a bogan exhaust place here in australia. They won't just spend 1 day jerry rigging an exhaust together and selling it like that. E.g. if you go to any bogan exhaust shop, ask them to make an exhaust for you, they'll make it in a few hours. But that is not how the japnese are. It would be engineered so well and so perfect that it is as good as oem quality.

That is how the japanese operate - quality centric focus.

You'll be suprised matey. I have done extensive research and consideration on the japanese movement towards quality after WWII led by people such as Deming.

A company like Mines is not just like a bogan exhaust place here in australia. They won't just spend 1 day jerry rigging an exhaust together and selling it like that. E.g. if you go to any bogan exhaust shop, ask them to make an exhaust for you, they'll make it in a few hours. But that is not how the japnese are. It would be engineered so well and so perfect that it is as good as oem quality.

That is how the japanese operate - quality centric focus.

Thanks the the tip, do you have any other obvious things to point out? Perhaps that the sky is blue?

for one, how would you know if the exhaust you made was actually a performance UPGRADE?? you could EASILY make a part that would be detrimental to performance. I remember a mag article ages ago where they were playing around with a heap of different options for a Type R exhaust, in the end, they couldn't improve on the factory flow. They could sneak a little more top end but response suffered.

You think a company like Mines is just going to go "oh that fits, it's made of titanium, it's going to be aaaawesome!!" F*ck no, they'd have real world and dyno testing to make sure they've created something worthy of the Mines name.

I wouldn't think for second that, given the amount of development time this car had, it was incredibly easy to go and better what Nissan has done in a few weeks. Of course in time the after market parts will offer some serious upgrades, but it takes time and on a car as advanced as the R35 GTR, you're not just going to slap titanium bits on and live in la la land thinking you've just created the ultimate car

even if you replaced all the factory metal bits with titanium, the weight reduction would be somewhat advantageous. Could possibly save that 1/10 sec. That 1/10 could give you the ultimate bragging rights.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...