Jump to content
SAU Community

Recommended Posts

Sorry to hijack the thread but this is still on-topic...

Does anyone know why the stock intake "tube" is shaped like it is? If changing it to a metal pipe will improve airflow, why is it not metal from the factory?

Not trying to flame, just innocently asking the question. Is it just so its more flexible, being all rippled? Cos I would've thought that the ripples would cause more turbulence with airflow.

A metal pipe would also get hot and possibly affect intake temps...maybe?

Can anyone offer a good explanation of which is better between the stock thingy and a metal intake pipe and why?

Just curious to know. I'm just reluctant to change mine cos it may be shaped like it is for a reason.

As far as i know 33's there are metal reinforcements in the ripples, and i haven't really looked but i'm guessing its smooth inside
I believe that it's for flexibility. Inside there should be metal shaped like a spring to hold the tube from calapsing(sp?) on boost.

There wasn't any reinforcing in mine. And I haven't seen one yet that has it.

If you you want reinforcing, then do this:

http://www.skylinesaustralia.com/forums/Re...l&hl=rev210

Edited by KeyMaker
There wasn't any reinforcing in mine. And I haven't seen one yet that has it.

If you you want reinforcing, then do this:

http://www.skylinesaustralia.com/forums/Re...l&hl=rev210

I honestly don't know if the skyline(rb's) have them, but I'm pretty sure the SR's do. I remember checking out a car with a hose that didn't have the reinforcement and it couldn't rev past ~5krpm. I first wasn't sure what was going on, but when we changed over to a hose WITH the reinforcement, the car easily revved.

Sorry to hijack the thread but this is still on-topic...

Does anyone know why the stock intake "tube" is shaped like it is? If changing it to a metal pipe will improve airflow, why is it not metal from the factory?

Not trying to flame, just innocently asking the question. Is it just so its more flexible, being all rippled? Cos I would've thought that the ripples would cause more turbulence with airflow.

A metal pipe would also get hot and possibly affect intake temps...maybe?

Can anyone offer a good explanation of which is better between the stock thingy and a metal intake pipe and why?

Just curious to know. I'm just reluctant to change mine cos it may be shaped like it is for a reason.

yeah the steel intake pipe will promote a lot more heat soak, but during load and high suction heat wouldnt get a chance to soak into passing air

only at idle would temps go up i'd imagine

A good way around it is to just by some 3" alloy or steel pipe and 2 3" hose clamps and just cut a small section out of your stock intake (about 3 ribs or so) and put the metal pipe in between the now 2 sections (about 12 cms of metal pipe) this will prevent it from sucking closed. :P

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...