Jump to content
SAU Community

Recommended Posts

my engine light came up yesterday but everything seems fine :) anyone else had a problem diagnosed from their light coming on. have a feeling it might be coilpacks from info from a workshop but i cant feel any breakdown as i had this problem wit my s1 and never saw a check engine light

Link to comment
https://www.sau.com.au/forums/topic/199874-check-engine-light/
Share on other sites

Hey Jerome

My SII engine used to come on a lot when I first got the car but it was also accompanied with the "safe mode" as where a lower gear was selected and restricted revs. Used to stop, turn engine off, wait, start again and was fine (until it happened again)

Ultimately turned out to be a faulty cable causing a short in the coilpacks - was all fixed and never repeated.

The ECU will have the fault code if you can extract it

Cheers, Al

yeah my S2 did this last week. everything was running fine and all fluids were at correct levels. took it to the importer and they hooked it up to a diagnostic machine and it turned out to be the o2 sensor giving a faulty signal. he cleared the code and it hasnt come back since. gotta love it when its something simple.

Mine had the check engine light come on intermittantly for a few weeks... got it checked with the consult software and it was from memory a "ignition problem"... in short it turned out to be a faulty coilpack so I threw in a set of splitfires and its been great ever since :)

mine did this, turned out to be low on brake fluid ( i think..mitchy?)

nah, it was the handbrake light (exclamation mark in the triangle) that can signify low brake fluid....

so dont go hammer and tong at the handbrake wiring thinking there is a short or something like i did! :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...