Jump to content
SAU Community

Rideout For Sauers With Motorbikes - New Date Discussion


Recommended Posts

Due to popular demand I am organising an SAU ride out on Saturday 19 Jan. We will meet at the Krispy Kreme carpark at Liverpool at 10am for a 10:30 departure. Regroup at the carpark just before the entrance to the National Park. If this is full of soccer mums, as it sometimes is, then just go around the corner to the first carpark off the National Park road. Anyone who doesn't want to meet at Liverpool can meet us there at say 11 to 11:15.

After this we will go through the Nasho and have an earlyish lunch at Thirroul. From there we can decide where we want to go. I usually go on to Mac Pass but it's probably too far for newbies or L platers. Newbies cos your arse will be sore and L platers cos there is a bit of fwy which you can only go 80km/h on.

So post up if you're coming.

EDIT****

Date changed to 19 Jan.

Adam said Livo and KK in the same sentence.....something I thought I'd never hear.

so this is what is come down to......our el presidente defecting to the biker group...ha ha ha

hope you guys have fun.

adam is it just SAU bikes invited? ive got a few mates from work and a couple of mates that i always go riding with... good group of people... would they be able to come if they could make it?

im not working on that saturday abo, so looks like im in, and more than likely ill have a gixer, R1, 2x620 dukes and maybe an MV Augusta, whatever the Yam 1000 is, and whoever else from work wants to come... ill confirm the numbers closer to the date



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...