Jump to content
SAU Community

Rideout For Sauers With Motorbikes - New Date Discussion

Abo Bob

By Abo Bob,
in Events Archive

 Share

Recommended Posts

Abo Bob Grand Master

Abo Bob

Posted
Posted

Due to popular demand I am organising an SAU ride out on Saturday 19 Jan. We will meet at the Krispy Kreme carpark at Liverpool at 10am for a 10:30 departure. Regroup at the carpark just before the entrance to the National Park. If this is full of soccer mums, as it sometimes is, then just go around the corner to the first carpark off the National Park road. Anyone who doesn't want to meet at Liverpool can meet us there at say 11 to 11:15.

After this we will go through the Nasho and have an earlyish lunch at Thirroul. From there we can decide where we want to go. I usually go on to Mac Pass but it's probably too far for newbies or L platers. Newbies cos your arse will be sore and L platers cos there is a bit of fwy which you can only go 80km/h on.

So post up if you're coming.

EDIT****

Date changed to 19 Jan.

lingeringsoul Grand Master

lingeringsoul

Posted
Posted

Adam said Livo and KK in the same sentence.....something I thought I'd never hear.

so this is what is come down to......our el presidente defecting to the biker group...ha ha ha

hope you guys have fun.

Haysey Grand Master

Haysey

Posted
Posted

adam is it just SAU bikes invited? ive got a few mates from work and a couple of mates that i always go riding with... good group of people... would they be able to come if they could make it?

Haysey Grand Master

Haysey

Posted
Posted

im not working on that saturday abo, so looks like im in, and more than likely ill have a gixer, R1, 2x620 dukes and maybe an MV Augusta, whatever the Yam 1000 is, and whoever else from work wants to come... ill confirm the numbers closer to the date

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...