Jump to content
SAU Community

Recommended Posts

jack3d pre-workout - though easing up on this lately it doesn't seem to have anywhere near the same effect it did the first/second months of usage. and i hate the taste.

I remember my first time I tried Jack3d, was scratching at my skin like a crack addict because my skin was tingling and got the jitters lol.

Just out of interest, how far over do you bend for barbell rows? Go for this imo, I love them:

Pretty much try to get parallel with the floor, I see people doing them at 45 all the time and they are sorta missing the point lol

jack3d pre-workout - though easing up on this lately it doesn't seem to have anywhere near the same effect it did the first/second months of usage. and i hate the taste.

I find if i take a break from it for a couple of weeks it is much more powerful rather than taking it before every workout. Definitely on the hunt for a new pre-workout though and have heard good things about 1MR, anyone have any feedback on it?

they're intended to be done parallel to the floor but that doesn't mean you can't vary it from time to time and do it at a 45° angle... it just hits higher up your back instead of the lats etc... just like changing from a pronated grip to supinated will vary it as well

best when held at the top a little, really squeezing your shoulder blades together

I find if i take a break from it for a couple of weeks it is much more powerful rather than taking it before every workout. Definitely on the hunt for a new pre-workout though and have heard good things about 1MR, anyone have any feedback on it?

I use 1MR from time to time and it works pretty good for me. Taste good, doesn't have 1,3 Dimeth like Jack3d which I've read causes some bad side effects.

Righto been doin a fair bit of thinking and reading and I've decided to change up the routine a bit

OLD ROUTINE

Monday

Chest/tris

Tuesday

Legs/abs

Wednesday

Upper back/bis

Thursday

Shoulders/abs

Friday

Deadlift session

NEW ROUTINE

Monday

Chest/tris

Tuesday

Legs/shoulders

Wednesday

Upper back/bis

Then repeat though on the second cycle I'll do a deadlift session..

So I'll be doing each muscle group twice a week though the amont of time spent on each muscle group in each session has been reduced

Essentially Shorter sessions more often stop needless over training and allow 3-4 days rest before getting back into it as appose to 5-6

I will still be doing the major exercises in both sessions though I'll will vary it so it's different ie

Chest

Day 1 barbell presses

Day 2 dumbbell presses

Back

Day 1 bentover barbell rows

Day 2 bent over t bar rows

I've also come to the conclusion that while Im tryin to bulk up my abs are goin to show up much anyway do I've cut the ab shit away

What do u guys reckon?

Appreciate input

Cheers

Righto scrap this, after some further research I'll be changing the routine again

Main changes will be:

Max 3 days of straight training then have a rest day

Changing to chest/bis and upperback/tris

Splitimg the routine so a secondary muscle that has been used in a work out gets at least 48 rest before being hit as a primary ie 48hours between a chest and shoulder session

Also will be goin by feel for when I start the training cycle again as appose to 1 cycle each week

Edited by GTR_JOEY

Ever considered a two day split repeated in the week? It's a lot of exercises to fit into two days, but three days off gives you some nice rest or cardio days.

I use 1MR from time to time and it works pretty good for me. Taste good, doesn't have 1,3 Dimeth like Jack3d which I've read causes some bad side effects.

It used to have it. I suppose without it, it's nothing more than a shitload of caffeine

Ever considered a two day split repeated in the week? It's a lot of exercises to fit into two days, but three days off gives you some nice rest or cardio days.

I have but my sessions would go for far too long and I just don't think I could have that many days off a week away from the gym...

Been doing a fair bit of reading and according to more then a couple of articles the best way for training to build bulk and muscle is to train once a week on each muscle group and really give them a smashing as appose to twice a week with less sets.

They also say that twice a week with less sets it's better for beginners while once a week with more sets is for more experienced body builders

They have their theories for saying this I can find the articles if anyone wants to read them

I agree with them that hitting each group once a week properly (as in, hard and heavy) is better than doing it twice a week with less sets. Without even seeing the theories behind it, I'd have my own about the muscles being broken down better by the former.

Number of sets does need to be defined though, because, for example, I do the two day split with a repeat later in the week, however, each exercise I do has about 6 sets to it and I certainly don't leave feeling like I could have done a lot more. It's sort of that...once a week thing...but repeated? Could be considered overtraining, but I heal pretty quickly and rarely feel like the workouts interfere with each other. I mean there's nothing I could do at the gym, short of causing myself a joint injury lol, that would require a week before I could safely work the muscle group again.

Na haven't heard of under tension mate....? I generally aim for 1 and a half minutes between sets, though I'm pretty social at the gym so doesn't always happen like that lol

In reguards to amont of sets for each muscle group, the general belief for once a week would be around 16 sets

For twice a week approx 8 sets

I agree that once a week is plenty of time to rest a muscle group after a hard session 4-5 days would be optimum in my opinion

I do the same workout on Thursday as I do on Monday, and Friday as I do on Tuesday. Even though it's a split routine, there's a small amount of crossover with muscle groups so Wednesday is the day of no gym = a thorough rest day. The only time I'll feel any sort of soreness or interference is if I miss a couple of days at the gym and then the next workout will take a little longer to recover from.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...