Jump to content
SAU Community

Recommended Posts

Has anyone tried Musashi Bulk? Ive tried looking for reviews but can't seem to find any.

I'm considering buying some...

Yeah I have used it quite a bit in the past. I consider it a pretty "safe" protein powder, as in it won't really mess with my gut (no creatine), and it's made by a proven, mainstream manufacturer. I used to use it in conjunction with Musashi 92, depending on the time of day or if it coincided with my workout. The Bulk has carbs, so it's better for pre or immediately post workout, while the 92 has very few carbs so it's better as a supp before bed, in the morning if you know you're having carbs for breakfast, or just as an in-between-meals protein shot.

You can definitely get both of those cheaper online rather than through the shops.

LOL

No, but if it's a daily and you need to keep driving it you don't drive it at 100% WOT until you've fixed the miss...

I get your point, all I was saying is that I'll avoid those movements right now until I've had a chance to get into physio, have it assessed and continue with recovery steps, in the mean time I can at least get a little leg work in with some lunges without straining that nerve/muscle/whatever it is.

I've got a holiday starting this Friday so can give it some rest then, be lucky if I see the gym at the hotel twice while I'm away.

You didn't have to edit out Laser GLI and change for Meteor either, I got it the first time :D

Edited by ActionDan

Squat - The exercise = deep squat.

Squat - The event = hip crease below knee height.

If you are not a competing lifter lifting a massive weight for 1 single rep - squat all the way down

Do a test.

load up your bar with whatever you squat for 10 reps and do 3 sets of 10 reps to parallel.

next session to the same weight and sets x reps but squat deep.

It will be harder and you will feel soreness you didn't with the parallel squats.

Foot position is not so important.

what ever makes your knees feel OK.

generally, they will point outwards.. probably closer to 30 degreese that 45.

Both deep and not-so deep (parallel or just below) squats can work.

There is debate over which is safer but, basically either done right will give an equivalent development.

Well respected athletes and coaches on both sides of the methods. Arguments are mostly on which is less injury risk.

I've done and had training on both. I believe either can be done safely enough but, like an advanced driving course squats are much better experienced with a few expert lessons. Whatever the instructor shows you , do that. It all works, just not so well if you have been coached (term used loosely)by people with bad habits themselves.

You could start a whole thread on discussing them that's for sure.

Rack http://www.samsfitness.com.au/products/bench-presses--power-racks/powertec-power-rack

Bench http://www.samsfitness.com.au/products/benches/powertec-utility-bench

I'm not going to get around to setting it up until next week I reckon because I've just moved into my new home so I have a lot of other things to do (reason I haven't lifted/eat properly in over 2 months), lost 4kg....

I have weights and bar but I don't have a weight stack yet but will get one when I get around to it. I'm going to have the rack sitting on carpet, you reckon it's worth getting the matts for underneath?

Depends if you care about your carpets.

Rubber mats might also leave a stain on your carpets.

Dans idea of a carpet mat on top of the carpet might be a good idea.

If you give no fark for your carpets then don't bother.

Mine is outside on a stencilled concrete patio floor so I have rubbr mats even though my plates are rubber coated.

it protects both the floor and plates.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...