Jump to content
SAU Community

Perth - Rb30det, Gt35r, R33 Box, More

TurkeySlapper
 Share

Recommended Posts

TurkeySlapper Enthusiast

TurkeySlapper

Posted
Posted

Parts as per the R31 coupe in the cars for sale section, if theres enough interest in enough parts then i may strip her out for bits. Please bear with me as far as pricing is concerned, im kinda making this up as i go, everything is open to reasonable offers.

RB30DET engine - standard rb30e block used although low km's, very good condition, S2 RB25det head used, VCT hooked up, RB25 oil pump and head gasket, standard rb25 injectors and intake. harness supplied too. So far has only sat on the 300rwhp mark due to my loss of interest but this motor will safely and reliably make 350rwhp all day every day. $1800

Garret GT3540R turbo, .82 rear, done less than 1000kms on 15psi, purchased mid '07. havnt checked shaft play but i can safely say its minimal. $1500 with home made dump

HKS cast manifold and external gate, low mount, very sturdy and discreet looking $offers?

*prefer to sell the turbo and mani/dump together, making it a true bolt on kit!

RB25DET gearbox, good condition, run on redline oil, no crunches or nastiness $1500

Buy the engine and gearbox together and get the 2500lb 6puck ceramic clutch thrown in!

apexi PowerFC for RB25, comes with hand controller $800

z32 AFM $offers

Series 2 RB25DET ECU $100

single peice tailshaft to suit RB25 gearbox into HR31 $offers

And finally the rolling licenced R31 GTSX, perfect condition, genuine 77000km's, front mount intercooler and plumbing supplied, adjustable S13 coilovers all round, !!5STUD!! conversion, R33 front brakes, r32 rear, 17" mags, sparco racing seats, Hicas locked and with R31house subframe bushes, Stagea steering rack. buy this car, drop your motor in and have a sweet sweet hr31. $offers around the $7000 mark please. keep in mind the cost of 5stud conversion, s13 coilovers, FMIC and the rims, plus an absolutely mint body, and this is a CHEAP price.

All of the above I can fit into your car also for a fee.

Please note again, I'm trying to sell the car complete, so if you want these parts immediately im sorry but no can do :thumbsup:

Steve 0419193341

Link to comment
https://www.sau.com.au/forums/topic/200861-perth-rb30det-gt35r-r33-box-more/
Share on other sites
TurkeySlapper Enthusiast

TurkeySlapper

Posted
  • Author
Posted
any pics?

What are you interested in? the majority of the parts you would know what they look like, im taking a couple photos of the HKS mani tomorrow. Keeping in mind everythings still in the car so pics are difficult. for a pic of the car look in cars for sale.

TurkeySlapper Enthusiast

TurkeySlapper

Posted
  • Author
Posted

price for the gearbox is stated in the original thread, $1500 ono

Im in balga, perth.

And ive have had about 6 strong shows of interest in the R33 powerFC, which leaves me in a pickle..... If somebody is wanting it really really bad and is willing to pay a bit more than my asking price, send me a PM, otherwise it will go to the first person who asked.

TurkeySlapper Enthusiast

TurkeySlapper

Posted
  • Author
Posted

thanks for all the replies and PMs fellas, dont be offended if i dont answer straight away, I need to keep it together for the time being as i may have a couple people who need to see it driveable. cheers.

TurkeySlapper Enthusiast

TurkeySlapper

Posted
  • Author
Posted
was i first in about the pfc? just so i know. can stop looking for another one

Looks like the complete setup is sold.... engine, gearbox, mani, turbo, afm and PFC all gone in one hit. smart man i say. Apologies to all who wanted the bits n pieces, but of course im going to sell the package before i separate. cheers fellas. Buy the licenced 31 shell instead. please?

TurkeySlapper Enthusiast

TurkeySlapper

Posted
  • Author
Posted (edited)
how much just for the rb30 block only? if you would open it im keen.

dr mafia - hmm, you might wanna read the thread a bit more carefully mate.

gt passage - will consider as a last resort only, i want the whole thing moved on... sell yours and buy the rolling coupe?

Edited by TurkeySlapper

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...