Jump to content
SAU Community

Recommended Posts

hi, iv noticed that my car runs pretty poor in general, except when its a hot day...

the car doesnt keep a steady idle, idles high (1000-1100rpm) and poops and cackles ect. (in the mornings when cooler, or of a night), but when driving on a hot day seams to keep a pretty steady idle and lowers idle down to about 500-600rpm

now, the car was bought from sydney and i am in tassie where the weather isnt always as hot as it is in the mainland. iv been told that the weather could be a factor...

does anyone else have this problem?

could the weather be a factor?

can it be fixed by a tunner?

does it have anything to do with the microtech ecu?

could it possibly be the heat range of my plugs?

anything will greatly be appreciated

cheers

doubt it would be plugs, dunno about weather, could be, but take it to your tuner and he should be able to look over your A:F ratios, fuel and ignition maps etc and tell you if its a tuning problem, and might be able to tune it out. get in contact with the previous owner and see if they had similar issues in cold weather, might not have been fully tuned in the first place, might have just had a quick tune

A tune to suit your climate should fix everything up. The reason it runs better in the warmer weather is because warmer air has I think less oxygen particles per cubic centimeter. Cooler air will have more. If your car is tuned to Sydney weather (warmer than Hobart), the air and fuel mixtures would be different. Something along the lines of that.

thanks guys thought i might have had it all in my head, about what your saying about the denceness of the air and it sounds to me it makes sence when put that way.

as far as getting in contact with previous owner im unsure as to how the car really performed as to when it was picked up in sydney. didnt really take much notice to how the car ran being new to the turbo scene.

hi, iv noticed that my car runs pretty poor in general, except when its a hot day...

the car doesnt keep a steady idle, idles high (1000-1100rpm) and poops and cackles ect. (in the mornings when cooler, or of a night), but when driving on a hot day seams to keep a pretty steady idle and lowers idle down to about 500-600rpm

now, the car was bought from sydney and i am in tassie where the weather isnt always as hot as it is in the mainland. iv been told that the weather could be a factor...

does anyone else have this problem?

could the weather be a factor?

can it be fixed by a tunner?

does it have anything to do with the microtech ecu?

could it possibly be the heat range of my plugs?

anything will greatly be appreciated

cheers

The weather can affect how you car runs. Turbo car inparticular due to hot weather the cars pretty much sucking in hot air. Only thing cooling the air is the intercooler. My mechanic told me the best temp for the car is 16c - 22c degrees (the best temp for a good day of performance)

The car will idle at a higher rpm in cold mornings / startup and then should go back down to normal idle rpm... 1000rpm (well with mine) when the car is warmed up.

If living in Tassie and its colder weather should = better, (Btw my car loves the cold weather. :( )

If you got "Drift" Spark Plugs, then the car will be quite slugish on startup cuz the plugs can take up to 10mins to warm up cuz they are designed to take a lot of heat as you know with drift racing you are constantly reving the engine.

Take it to your mechanic to check the air/fuel, ECU, idle timing if ya need, doesn't hurt I guess ;)

when you have badly arching out coils the cooler weather can give you problems...

happened to me a while back...

there's a thread around somewhere that goes into good detail

The weather can affect how you car runs. Turbo car inparticular due to hot weather the cars pretty much sucking in hot air. Only thing cooling the air is the intercooler. My mechanic told me the best temp for the car is 16c - 22c degrees (the best temp for a good day of performance)

The car will idle at a higher rpm in cold mornings / startup and then should go back down to normal idle rpm... 1000rpm (well with mine) when the car is warmed up.

If living in Tassie and its colder weather should = better, (Btw my car loves the cold weather. :P )

If you got "Drift" Spark Plugs, then the car will be quite slugish on startup cuz the plugs can take up to 10mins to warm up cuz they are designed to take a lot of heat as you know with drift racing you are constantly reving the engine.

Take it to your mechanic to check the air/fuel, ECU, idle timing if ya need, doesn't hurt I guess :cool:

Dude everything you said sounds great except "drift spark plugs". WTF!? Haha. It is worth pulling out the plugs and checking you have the right heat range but otherwise yes the weather, temp and humidity can affect the tune so getting it retuned locally would be worthwhile. Most of our cars run worse on hot days.

Dude everything you said sounds great except "drift spark plugs". WTF!? Haha. It is worth pulling out the plugs and checking you have the right heat range but otherwise yes the weather, temp and humidity can affect the tune so getting it retuned locally would be worthwhile. Most of our cars run worse on hot days.

Lol! I was suprised myself when I first heard about it. Friend of mind had a R32 GTS-T 4 door set up for drift and thats what he told me. I'm sure the range should have to be the correct range but the type of spark plugs is what counts I guess. I just use NGK Iradium / Platinum.

looks like a retune for me then, unless the humidity is hot then it willl play up even if warmed up after driving for awhile. but it might pay to check my plugs and my coilpacks also, hopefully its only as minor as this otherwise a retune down here is pretty pricey...

  • 2 months later...

i changed my plugs, the plugs that were in there was gapped at 1.1, the new ones were iridiums that have a 0.8 gap and got rid of the unsteady idle, it was missing like mad before but now its a very slight miss on idel.

plugs have been eliminated, but i still have the high idle problem, would the O2 sensor cause high idle?

Are you running a stock ECU or aftermarket?

I noticed that with my PowerFC the car usually starts at 1500RPM and settles down to 1000 pretty quickly (maybe 1/2minute?).

With the MINES ECU it used to go to about 1200 and hover between 950 and 1100 RPM pretty soon after (as in it would stay constant for a couple of mins then change for a couple mins most of the time it stayed on the same idle....).

EDIT: Most of the time I've been using the car during warm/hot weather, not really cold weather...

i have a microtech LT-8 ECU fitted, are you suggesting it could be the ECU? is it possible to alter something on the ECU to change whats happening?

full house can you explain what you mean by road damage? are you saying overtime the ruff roads may have shook and shocked the ECU?

i have a microtech LT-8 ECU fitted, are you suggesting it could be the ECU? is it possible to alter something on the ECU to change whats happening?

I *believe* and I emphasize that I am not an expert on cars, that the ECU would be involved here, I mean the computer does control the idle :laugh:

But I'm not sure if its causing any of the other side effects, you will need some more experienced who can help there.

And a steady idle of 500-600 RPM? My car would stall before it gets that low ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
×
×
  • Create New...