Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

So let me get this straight, as soon as you get your licence your getting a GTR???? As your first car??? NOT a smart move and how do parents fly for that anyways?? :( ... not tryin to bring ya down bro, just that kinda car as a first is so not a good idea, i reckon you should at least wait a year b4 you go gettin a gtr... but your life your decision i guess!! ;)

mine had red and white gt badges on it when i bought it..

and its definitely not a turbo..

its not like we can stop other people cruising but just thought it would be nice to do something different.

and due to personal experience that most people bail after about 4 or 5 meet points i haven't made it a hugely long cruise. if people want to keep driving after the map runs out then thats cool but i have work at 5 am on saturday so..

hopefully a few people turn up

hahah i still got 4 studs white and blue NA badge....and just a cabled tied FMIC i promise its non functioningu might see a snail under the hood and i promise thats cabled tied and non functioning too and you'd hear my WOOSH but thats electronic bov i promise :) so can i come :(?

I would like to see you all making an effort to go "WOOSH!" as you change gears please :D Loud and out the window! lol

oh yes, it will happen, yes it will!! mwhaahahaahaa!! um, yeah should be a good cruise, even though i wont be in my 34(so not fair) ill be riding shotgun in one of those lancer things... come on chi, you better come, bring ya mums car, who cares...lol

hahah i still got 4 studs white and blue NA badge....and just a cabled tied FMIC i promise its non functioningu might see a snail under the hood and i promise thats cabled tied and non functioning too and you'd hear my WOOSH but thats electronic bov i promise ;) so can i come :banana: ?

Who needs a turbo anyways when u can run 12s N/A...

The right weight, the right parts, the right tune...

Wanna see some one go all out N/A on a Skyline/silvia!!!!

hey this sucks look what i just found

Graham Farmer Freeway Tunnel (Northbridge Tunnel) Closures on Friday 25 January

There will be an overlap of a few hours where both bores will be closed simultaneously. Please plan to use an alternative route.

  • westbound lanes will be closed from 9pm to 2am; and
  • eastbound lanes will be closed from 11pm to 5am.

so we can go out but not back thru the tunnel

Edited by messanic

where did you see this?

i had only planned to travel through the tunnel once heading east

then loop around to mounts bay road then along riverside drive then into cottesloe..

so the map i had planned will be ok as the east bounds arent closed till 11?

how many people are we expecting?

need to know roughly how many to print.

30 maps....

I think u might get more than 30 cars hey....

its been posted on a few forums.

I saw a few turbo nissans and subarus wed night runnign pretty shocking times...

Slower than few NA cars i know off..

They will blend in pretty well heehe

Edited by locote

ill do another 20 yer?? that should be enuf

gotta save em trees right

might want to delet it tho before any of dem undesirables get a hold of em

Edited by messanic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...