Jump to content
SAU Community

Recommended Posts

Hey all i want (NEED) another R32 GTS-T M-Spec

has to be m-spec, and black or white

less then 120K's

great condition (just remember i got a 32 to scab parts off)

Must, most definately has to HAVE a sunroof from factory

part from that not fussed wat state and must be under $12000

Dead stock aswell, I DONT want a modded one

surely sum1 must have 1 and i hate lookin out my window at a smashed one

pm me if ya sellin one or know of one for sale :)

Cheers

Link to comment
https://www.sau.com.au/forums/topic/201683-wtbr32-gts-t-m-spec/
Share on other sites

Yeah and I have one with 26.0 kms on it.... Seriously man, if you think r32's have got mileage like that you are kidding yourself... but I am sure the person selling it to you will be happy to wind it back for you if you want to keep fooling yourself.

^ my first 4 door has 38,000km when it came in with log books

care to explain that?

also if you change your mind I might part with my 25'd 32 for 15.5k

Haha,

I cannot count the amount or r32's i looked at before I bought mine. Many were fresh imports and all magically had done 7-80,000km and had interiors that were terribly worn etc etc... It does not take much to realise that a car has been wound back and I would say the vast vast majority of 32's are.

Your car came with log books doesn't mean the k's are a guarantee, but it is not impossible for a car to have low k's.. but if it had 38,000km it would be like a new car inside I would expect and all the other wear indictors outside the car must have been in perfect condition, suspenion etc etc..

Haha,

I cannot count the amount or r32's i looked at before I bought mine. Many were fresh imports and all magically had done 7-80,000km and had interiors that were terribly worn etc etc... It does not take much to realise that a car has been wound back and I would say the vast vast majority of 32's are.

Your car came with log books doesn't mean the k's are a guarantee, but it is not impossible for a car to have low k's.. but if it had 38,000km it would be like a new car inside I would expect and all the other wear indictors outside the car must have been in perfect condition, suspenion etc etc..

it was like new inside no wear on anything cleanest 32 regency had ever seen

it was a 4 door non type m auto turbo not really a thrash car

also if km can not be confirmed its marked on the auction report

which means the car sells for less so there no point in them being wound back

that and the fines are large for winding them back in the first place

car yards here are generally the ones that make more cash if a car has low kms not the auctions

why would a japanese person bother to wind back the kms on a 2k car?

a car yard that sells that same car for 18k would have alot more reason to

as was exposed in that T.T report that was done auction reports showed the correct km's cars didn't

sorry to fill your thread

Edited by 1400r

i dont want a 25'd 32. lol

but seriously r32line i dont w=know where u live but u musnt see many decent 32's. coz the majority i have looked at have about 90,000 to 100,000 kms on it which is wat i want

but it has to have sunroof

otherwise who could i go through to import one??

im in adelaide

otherwise who could i go through to import one??

im in adelaide

i picked 32 mspec up from sinergy/pvp back when they were on mullers rd.

mine had 52thou and recieved top import grades.

2yrs and another 25thou on top i wish it was as clean as the day i drove it out their shop.

a good friend of mine imported one privately with 10thou on the clock...

i didnt believe it until i saw it the first time... and yeah it was

his and mine were the real deal, no matter what anyone says.

i dont want a 25'd 32. lol

but seriously r32line i dont w=know where u live but u musnt see many decent 32's. coz the majority i have looked at have about 90,000 to 100,000 kms on it which is wat i want

but it has to have sunroof

otherwise who could i go through to import one??

im in adelaide

I live in Melbourne and I looked at lots of 32's over 2 years ago when I bought mine and the majority were under 100,000km on the odometer. They were all rubbish though, the car I ended up with read 130,000km and had been in Aus since '99 and owned by a guy in a regional area how did a lot of the k's on striaght roads with no traffic lights, it was the best example I looked at and tests confirmed that, so I bought it. All I was saying is that you are placing a lot of confidence in a number on a dial that I almost completely ignore (when looking at Skylines). There are much better ways to asess a cars condition. Anyway, best of luck with your search and I hop you find the right car for you!

  • 2 months later...

hey i have one for sale not dead stock..

bit of paint work, body kit (Vertex), FMIC (HKS) and boosted.

has blitz exhaust (which came with car when imported)

87000km well looked after.

check my thread in signature.

Edited by Benno-

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...