Jump to content
SAU Community

Recommended Posts

What's up people we all love Skylines so we have something in common right there, awesome cars for sure aren't they!

Been in aussie 2 years originally from South Africa also lived in NZ for 6 years and yer, you can call me JJ :)

I gotta say there are definitely some nice Skylines in AUS, but I also have to admit that I'm stabbin myself in the foot for not buying 1 over there and bringing it with me, I'd have saved a tonne. Cars here are hell expensive wtf?

Anyway, just bought an auto R33 HR33 (RB20E) bring on the whining - hahaha I know (at least it came with a GTR front bar and mags, choice aye LOL). Only bought it because I could get it pretty cheap and I want the R33 body. Plans are to either shove a RB25DE in it and add a massive turbo or just, depending on the finances, dump a RB26DETT in there. Obviously will have to do the suspension as well, 4 -> 5 stud wheel conversion + brakes, engine management and perhaps a few other little things. The work won't be done by me as I don't have time.. I'm interested in what you all think about it, obviously knowing the aus car scene better than me. I'm actually looking for a RB25DE with manual gearbox at the moment, so if there are any known cheap places out there to pick them up, or for jap parts/engines in general, please let me know. Based in QLD but not worried about paying freight or whatever. Depending on the replies in this thread I might make another thread, look forward to hearing what everyone has to say. Cheers :(

PS: Also wondering how much the engine conversion including the cost of the engine (say for the RB25DE just to start off with) would cost, and prices for any of the other mods as well.

Link to comment
https://www.sau.com.au/forums/topic/201981-howzit-guys/
Share on other sites

buying an RB20E equipped R33's an interesting choice... esp since the price difference between them and an R33 GTSt or even a GTS25 is around $1000 to $2000... much less than what an engine swap will cost you.

As for upgrades... an RB30ET would be my engine of choice, simply because putting an RB30E or RB30ET into an RB20E equipped car is very very easy. Whereas with a DOHC you have to change the loom and everything. Lotta VL guys are getting good power out of SOHC RB30ET's, plenty of cheap parts, and best of all you get to run around with a "holden" rocker cover and freak everyone out when you pop the bonnet.

Link to comment
https://www.sau.com.au/forums/topic/201981-howzit-guys/#findComment-3590583
Share on other sites

Mmmm well I was lookin on ebay, carsales, carpoint you name it for about 3 weeks and I couldn't find a single skyline for sale under 5grand, or listed for that I should say. I also checked redbook and it seems their private sale prices are pretty hectic, real high. Round here there aren't many cars that sell for cheap if you get what I'm sayin, have 2 go to brizzy to find them. I doubt that a R33 GTS[T] can be found for 6-7 grand, I paid 5 for it - I dont have any contacts on the scene here either so it's not really something doable for me. Even if so I'm on my P's and with the QLD laws, there's not much I can do to get around the "no turbo" bullshit. Didn't really have a choice.

If you ask me doing an engine conversion with a reasonably fresh RB25DE will cost less than buying one (with high KM's that has been thrashed) and even if not, I'll know it HASN'T been thrashed and that it has just been put in, no hassles anytime soon down the track. I'm kinda tempted to try find a VQ35DE (the 180kW version) from a 350Z, love the way the revs climb up + sound is nicer than a RB25DE[t] as well, to me anyway. Not to mention I'll be clearing all the laws (specifically the no turbo and 200kW N/A restrictions) and be sitting with a pretty unique ride with heaps of power. Aint after a SOHC there's more to it than just costs mate - and I'm not exactly a holden fanatic either put it that way, but thanks for the suggestion aye :)

Edited by ¯ڑôhàññ隯
Link to comment
https://www.sau.com.au/forums/topic/201981-howzit-guys/#findComment-3591685
Share on other sites

an R33 GTS is the regular R33 with RB20E SOHC engine. an R33 GTS25 is the one with an RB25DE, but there's virtually no R33 GTS's in the country (they all came in under the old CPA import scheme where there was no power to weight requirement) so everyone pretty much assumes when you say R33 GTS you're actually talking about an R33 GTS25.

Ah didn't realise you were on your P's... in that case RB25DE might be the way to go, but I like your VQ35DE idea a lot, I've been toying with putting one in my R32. Its a great engine. 5K is a pretty good buy, but you also have to consider there's more to it than just an engine... you'll have to upgrade your brakes and hubs to equivalent parts for example if you want to get it engineered.

Link to comment
https://www.sau.com.au/forums/topic/201981-howzit-guys/#findComment-3591844
Share on other sites

an R33 GTS is the regular R33 with RB20E SOHC engine. an R33 GTS25 is the one with an RB25DET, but there's virtually no R33 GTS's in the country (they all came in under the old CPA import scheme where there was no power to weight requirement) so everyone pretty much assumes when you say R33 GTS you're actually talking about an R33 GTS25.

Ah didn't realise you were on your P's... in that case RB25DE might be the way to go, but I like your VQ35DE idea a lot, I've been toying with putting one in my R32. Its a great engine. 5K is a pretty good buy, but you also have to consider there's more to it than just an engine... you'll have to upgrade your brakes and hubs to equivalent parts for example if you want to get it engineered.

Actually bruva, the GTS25 is just the RB25DE - no turbo[t], the GTS-T is the RB25DET. That makes the Nissan Skyline R33 GTS - RB20E SOHC. The RB20E's were built in relatively large numbers in Japan and used as company cars for the employees of the factories, and yes there are very few in the country that is true :)

NRV155 = I knew all about what I'd have to do when I bought it, but I didn't see why I should have bothered with a GTS25 (RB25DE) when it was going to cost me what.. 4k extra. I can spend 4k on this and have a better car. Only makes sense.

About the brakes etc, I mentioned that in my first post --> doing the 5 stud conversion and so on - not really fussed about the costs, engine will cost the most obviously so ya that's where the focus is. The VQ35DE is a really interesting idea I think as well, but then again, how much do you pay for a VQ35DE? Don't know how common they are and they're probably pretty expensive, haven't seen any advertised online at jap import garages or forums, so I'm assuming they're somewhat hard to get a hold of. I recon a sleeper black R33 debadged with a VQ35DE would be awesome, nobody would know WHAT the hell you got under the hood, they'll just hear this awesome sound n think wtfff? Lets try him, n get smoked. Could make for a pretty unique car aye.

PS: What would you fellas guess a 94 R33 GTS (RB20E) to be worth? Just out of curiosity.

Edited by ¯ڑôhàññ隯
Link to comment
https://www.sau.com.au/forums/topic/201981-howzit-guys/#findComment-3593041
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
×
×
  • Create New...