Jump to content
SAU Community

Recommended Posts

so i finally have 300 horsies running around in my engine bay!!! it was a fight getting them all in there and quite expensive but i made it...

now i need the oil cooler on and then time to hit oran park again!

to get these horsies in there i used:

HKS GT-RS turbo kit

Just Jap FMIC

Xforce 3'5" turboback exhaust

Apexi Power FC with Boost Control Kit

Apexi Power intake

Splitfire Coil Packs

forgot a couple of things:

Nismo 555cc injectors

boost is 1bar...

guys who r getting more for the same or similar setup... any tips for tuning or adjustment?

did you have to tighten the wastegate?

Link to comment
https://www.sau.com.au/forums/topic/202004-300-ponies/
Share on other sites

if he is running 300rwhp with a gt-rs i would say he is running about 12-14psi. as they normally make 350rwhp @ 16psi (generally not always, depends on the condition of ur engine etc )

I'm on 255rwkw with the GT-RS @1.1 bar.

Link to comment
https://www.sau.com.au/forums/topic/202004-300-ponies/#findComment-3588648
Share on other sites

Is that 300rwhp or 300hp at the engine? i'm guessing if you say its in your engine bay then its at the engine? Because if thats the case it seems alittle low for a GT-RS on a rb25...i was just wondering and not having a go at you...

1 bar is just creeping up into that turbo's efficiency range...whack it up to 1.2-1.3 and she'll come alive...tightening the wastegate should not have an effect on peak power as you max boost should be controlled by the PFC boost controller...however...there should be enough preload on the actuator to hold the wastegate flap firmly shut...

Link to comment
https://www.sau.com.au/forums/topic/202004-300-ponies/#findComment-3588948
Share on other sites

if he is running 300rwhp with a gt-rs i would say he is running about 12-14psi. as they normally make 350rwhp @ 16psi (generally not always, depends on the condition of ur engine etc )

im running 10.5 on low boost and have 320hp same turbo

Link to comment
https://www.sau.com.au/forums/topic/202004-300-ponies/#findComment-3590852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...