Jump to content
SAU Community

Recommended Posts

Ive got Nismo LMGT3s on my 32GTR. 17 x 10" and they clear my F50 brembos with about 3-4mm gap and just fit inside the guards (you cant fit your hand on top of the front tyres). Any bigger than this i reckon youd need to roll guards

post-46532-1201507449_thumb.jpg

ok guys i found a set of Volk F-Zero Challenge rims in 18x8 at the front and 18x9 at the back, i've asked a few people who deal with imports etc about the offset because the rears are +45, but i'm not sure of the fronts, and i got told that should be fine because there's huge amounts of space under there before anything will hit the coilovers. they said i could go for an 18x10 with a slightly smaller offset and still not have to worry about any hitting or guard rolling. anyone got any comments/experience they wanna share?

yeah i know. i've already got 235/45's for the front so going 265/40's on the back will be a perfect match. if all else fails i'll just do 235/45's all round, it won't make any difference, they should still fit up nicely. i was more concerned about the offset than anything. as long as the fronts are somewhere between about +25 and +35 i should be fine. and considering the rears are +45 i can't imagine the fronts being any smaller than +30.

anyone have any objections to the +45? lol. according to the offset calculator they'll only stick out 6mm further than the standard rim but will be 20mm closer on the inside cause the standard offset is +38 for the 8" wide gtr rims right? sorry to harp guys, its just that i'm looking to pick these rims up tomorrow and hope to not have any fitment problems lol. so any advice would be great. thanks.

+45 offset it pretty high and 20mm LESS inside clearance would be a problem I would assume. I agree with SoFly, get something in the +20's range or even less for that width.

If that's what you want though, trial fit.

anyone have any objections to the +45? lol. according to the offset calculator they'll only stick out 6mm further than the standard rim but will be 20mm closer on the inside cause the standard offset is +38 for the 8" wide gtr rims right? sorry to harp guys, its just that i'm looking to pick these rims up tomorrow and hope to not have any fitment problems lol. so any advice would be great. thanks.

You didn't mention the width of the wheels (offest and width work hand in hand to determine fitment and stance), but I can tell you that I'm 99% sure that they're not going to sit flush the guards at all... They'll sit in the guards and won't look as good as proper offset wheels.

Look for +22 offset in a 9" wheel for good fitment on an R32 GTR.

read what I wrote before. If you don't know what your doing when it comes to offset its going to look stupid and defect magnet. IMO If you put on +35 or greater the rim is going to stick out plus rubber. Its going to look tough but also stupid at the same time if you know what i mean. Also you prob going to need spacers if you get the wrong offset that is also crap and extra money. If you put smaller wheels on front and bigger on the back that should be ok with GTR but it looks better when its even and better handling as well and not to mention a nightmare to get your wheel alignment sorted out for the x time your chamber will shift so extra money plus have fun selling this set when you plan to upgrade or sell your car. hope that helps.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...