Jump to content
SAU Community

Recommended Posts

Hi people,

Been busy working on my car..r32 gtr this is what i have so far. Its time to dyno tune the car soon and wanted to get your opinions and suggestions on max power I should push or expected power output.

2860-5 turbos

tomei exhaust manifolds

hpi turbo outlet pipes

trust downpipe

trust power extreme 4inch exhaust

arc intake box

alloy intercooler pipes

blitz lm intercooler

erl aquamist water injection running 50/50 meth/h20

700cc sard injectors

sard fuel press reg

apexi intank 280l pump with direct relay

trust fuel rail with -6 line in

tomei 1.2 headgasket

tomei steel gasket kit

tomei oil restrictor

trust oil pump

hks cam gear

trust sump and baffle

blitz -8 sparkplugs

splitfire coilpacks

custom alloy radiator with built in oil cooler

profec boost controller

hks fcon v-pro running on map sensor

gts4 4.3 final drive

os twin plate clutch

1.5way cusco front lsd

**standard pistons,rods,bolts. :(

engine is in good cond, high even compression across the board.

Im building this car for street/drag use.. what do you guys think the max i should push this engine 350kw? 1.3 bar? I have another engine being built with everything, but not for few months...

Thanks guys.. :)

Edited by maxspd
Link to comment
https://www.sau.com.au/forums/topic/203023-max-horse-power/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...