Jump to content
SAU Community

Recommended Posts

Hey all, I'm thinking of selling my current car (STi) and getting a R33 GTR. I have a budget of around $38,000 - $42,000 and was wondering how hard it would be for me to find a clean R33 GTR in pretty stock condition with this budget. Was looking at R34 but I don't want to get another loan, its a bit out of my price range. Cheers

Link to comment
https://www.sau.com.au/forums/topic/203169-thinking-of-buying-a-gtr/
Share on other sites

Hey all, I'm thinking of selling my current car (STi) and getting a R33 GTR. I have a budget of around $38,000 - $42,000 and was wondering how hard it would be for me to find a clean R33 GTR in pretty stock condition with this budget. Was looking at R34 but I don't want to get another loan, its a bit out of my price range. Cheers

Well for one, don't get a pure stock GTR as the turbo's are of the age that they will die. Budget for new turbo's $4000-5000 installed. The suspension will likely be a bit worn as well, another $4000-5000 installed for a full set.

Tell us why you want a GTR and your plans and people here can give you a better idea what to look for.

Look in the for sale section. Lots of cars for sale there.

Well for one, don't get a pure stock GTR as the turbo's are of the age that they will die. Budget for new turbo's $4000-5000 installed. The suspension will likely be a bit worn as well, another $4000-5000 installed for a full set.

Tell us why you want a GTR and your plans and people here can give you a better idea what to look for.

Look in the for sale section. Lots of cars for sale there.

I've heard of many GTR owners with their stock turbos and suspension still doing fine. So it really depends on your luck on how well the car has been maintained.

An R34 GTR can break their stock turbo too if it isn't well taken care of.

I've heard of many GTR owners with their stock turbos and suspension still doing fine. So it really depends on your luck

So have I, but I've heard and experianced a lot more failing stock turbo's. And suspension you can live with, but brand new suspension is always better.

The main difference with the R33 GTR is the series.

In my personal opinion, I didn't like series 1, and going series 2 which added 2-3K in price, and 2K in the redbook at the time I checked about 10months ago, series 3 which has the zenon lights et cetera costs another 2K on top of the series 2 unless you get lucky ;)

Series 2 has thinner lights, different steering wheel and I think the bonnet is slightly different for the lights, and the front bar is slightly different.

Series 3 has a different lower lip compared to series 2, one reverse light one rear fog light, newer gearbox syncro's, and

red-stitching on the seats and steering wheel. Although the chance of getting an original lower lip is incredibly low since they sit low and break easy (and cost a fortune to replace).

There is also the V-spec difference which you can lookup anywhere, active LSD vs the normal GTR's mechanical, disadvantage is the active LSD is very hard to rebuild.

However prices have dropped by a huge amount, I've seen a series 1.5 for 20K on these forums so they money you have is enough. Check the forums, carpoint and carsales if your looking.

Well for one, don't get a pure stock GTR as the turbo's are of the age that they will die. Budget for new turbo's $4000-5000 installed. The suspension will likely be a bit worn as well, another $4000-5000 installed for a full set.

Tell us why you want a GTR and your plans and people here can give you a better idea what to look for.

Look in the for sale section. Lots of cars for sale there.

Yes, plenty of cars for sale, I disagree with the suspension costs 4-5K. You can buy my low km R34 suspension for $600 and install them for a few hundred :).

Or you can look at the group buy for Bilsteins for about 1K by SydneyKid, and installation isn't that expensive unless you do more than just struts.

Turbo's can die, 4-5K is some good turbos with installation and you'd probably want a power FC to go with it (+1K?) :)

  • 1 month later...
Hey all, I'm thinking of selling my current car (STi) and getting a R33 GTR. I have a budget of around $38,000 - $42,000 and was wondering how hard it would be for me to find a clean R33 GTR in pretty stock condition with this budget. Was looking at R34 but I don't want to get another loan, its a bit out of my price range. Cheers

Hi F.N.

Congrats on researching a quicker much more solid and dynamic vehicle which won't depreciate much more than what it has already.

Yes there are just a few running around for sale at about $25K but as you've read, they need to be thoroughly checked out for this or that.

I organised a GT-R drive day last year for enthusiasts and I think I know of one coming up for sale before the end of this financial year and it's in stock form except for Fujinobo exhaust which is a top-of-the-line product for Skylines and others due to their R&D to ensure a) lack of contrictive popints b) no obtrusive resonance at any rev constancy and c) longevity. It'll be in perfect body and engine condition - colour is storm grey metallic. Full service history with Powerplay and Steve's Autobarn (Skyline specialist mechanics). Low Kms (pretty genuine) at below 70,000Km. Carpet and upholstery are in perfect condition. It's never seen track racing in Australia, and you can talk to Alistair (Powerplay) and Steve Phillips (Steve's Autobarn) about anything that has been replaced due to need or preventative work. It will be on sale for just over $30K. It is a non-V-Spec so there'll be no problems with active lsd. But has Tein springs and suspension to bring it down to V-Spec height. Oil I believe has been replaced by the owner every 5000Km and he's quite meticulous. It has the Xenon lights and is a '96 model - as I said with low Kms. It will come (I believe) with two sets of wheels a) genuine GT-R R33 forged alloys that don't even have a mark on them + b) German BBS look-alikes also forged. At last count, both sets have plenty of rubber with brand new Potenza R005 on the GT-R alloys.

Lol in your search anyway

E-mail me on [email protected] or PM. A bit of camera footage of the man's car is available from the drive day as well.

Regards,

Terry

Excellent choice :thumbsup:

I'd say go for a very good condition series 2-3 rather than an R34 in average/poor condition.

You'll be able to find something good for $30-$35,000 and add a few k extra if need be (i always allow a little more cash).

I'd recommend a GTR with some minor mods. A clean, well-kept example with intake+exhaust+coilovers is a great buy with the little bits already sorted. My car came like that, and the engine was stock, so i knew it hadn't been pushed too hard.

All the best mate.

i bought my r33 ser. III 6 weeks ago. Awsome cars. if you want a crazy ser. III there had 1 on carsales for 42000 in Tassie. it was a ex targa car, it was black from memory, it had a full cage, suspension, brakes, 330kw @ tyres and it was registered. dont no if its still there and not sure about reging it in aus. but boy was i tempted.

Hey dude

+1 for saving extra and getting R34 GTR. Shop around you can get a good one for your budget. Think about it man! A R34 GTR! Check this link out. http://www.j-spec.com.au/list/index.php?ID=12187

Good luck and happy shopping. ( I'm jealous ).

And buy an R33 for say 25k cash. Throw 5 or 10k cash at it and shit all over a std R34 GTR for the same or lower price?

How much more power & performance does an R34 have over a R33 anyway? Heaps?

all about the looks and again overall vehicle quality.

R32? Smaller and lighter, what engine?

my opinions so don't burn me peoples!

Edited by Union76
And buy an R33 for say 25k cash. Throw 5 or 10k cash at it and shit all over a std R34 GTR for the same or lower price?

How much more power & performance does an R34 have over a R33 anyway? Heaps?

all about the looks and again overall vehicle quality.

R32? Smaller and lighter, what engine?

my opinions so don't burn me peoples!

Hey dude

Yeah, all valid points. If it was me though, i'd want a younger car. Just for the simple fact of things breaking with age. Personally i have a R33 gtst and love the R33 gtr.

I just bought mine, an absolute minter mildly warmed up R33 SII under 30K. Take your time, do your shopping and soon enough the right one will present itself.

Edited by flyingfridge
I just bought mine, an absolute minter - Take your time, do your shopping and soon enough the right one will present itself.

^^^^here here^^^^

& "1C3B3RG"

Younger car by age or kms travelled? Can you believe the kms travelled without records? No - this brings a lot of things into question

And how many years between s1 and s2 GTR? Even S1 - S3 GTR? All in the same boat if you're askin' me.

96 GTS-T I've had (cost 15000 at the time), and if you threw 10k at one (ie extra that a GTR would cost ie 25k) how hard would it go? Sideways well! Lot of fun those things, how I miss going sideways - well the 2 wheeled sideways variety anyway!

Edited by Union76
^^^^here here^^^^

& "1C3B3RG"

Younger car by age or kms travelled? Can you believe the kms travelled without records? No - this brings a lot of things into question

And how many years between s1 and s2 GTR? Even S1 - S3 GTR? All in the same boat if you're askin' me.

96 GTS-T I've had (cost 15000 at the time), and if you threw 10k at one (ie extra that a GTR would cost ie 25k) how hard would it go? Sideways well! Lot of fun those things, how I miss going sideways - well the 2 wheeled sideways variety anyway!

I meant R34 GTR younger. By age too 2001 R34 GTR will not fall apart as much as 1995 R33 GTR. Logic, and the law of common sense. Happy times.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...