Jump to content
SAU Community

How Much Did Your Tune Cost ?


Recommended Posts

budget for $800~1000 for a comprehensive tune ...

and $500~$700 for a get everything working ok tune ;)

remember tuning isn't just always about punching numbers into the ecu ...

the workshop that carries out the tune will most likely do a thorough check of the mechanical side of things to make sure your car can handle it and you may need a new set of plugs, full tank of gas etc etc.

also the better and reputable the tuner the more it'll cost generally.

best thing to do is talk to your tuner and see what they reckon.

Hope that helps :)

Link to comment
Share on other sites

yeah thanks guys, this is helping heaps.

the only place iv found so far who will touch the emanage blue is allstar, and they want me to install and get the car running first.

i think ill be able to manage that

any other ideas on places tht might tune it ?

i only called xspeed and allstar so far. any other ideas ?

Link to comment
Share on other sites

i got Top Racing to tune my car i got :

Power FC

Power FC boost controller kit

Z32 AFM

FMIC

Walbro Fuel Pump

3" cat back

3" dump pipe (stock cat)

and they charged me 300 then it was knocking like crazy cause they didn't do road tune but they were happy for me to come back after 2 days for the road tune got it done free of charge so yeah try them they're wicked ;)

Link to comment
Share on other sites

yeah thanks guys, this is helping heaps.

the only place iv found so far who will touch the emanage blue is allstar, and they want me to install and get the car running first.

i think ill be able to manage that

any other ideas on places tht might tune it ?

i only called xspeed and allstar so far. any other ideas ?

can vouch for allstar, they do really good work.

Link to comment
Share on other sites

  • 1 month later...
i have full race build rb30/26 + T78 3 hks fuel pumps + a whole Race fuel system

with pfc i was quoted $1000Canadian

I paid roughly $1100 for PowerFC tune + cam gears ($250) + tuning of EBC (minor). Expensive tune but great results, I did know another company that could do it cheaper but I decided pay the extra $$$ for the quality tuning :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...