Jump to content
SAU Community

Recommended Posts

Item: Series 1 R33 RB25DET 130,000kms

Price: $1000ono head is off so will require new head gasket and manifold gaskets

Location: Southside of Brisbane, It is sitting on a pallet to be shipped if needed

Contact: PM

Comments:

Decided to do my RB30DET Conversion

Complete long motor including Turbo/Plenum/Split dump

Always run clean and looked after blew no smoke

Fueled with BP Ultimate or Shell V-Power Racing - Always!

Serviced every 5K with Royal Purple and new Oil filter

Motor recently had a standard 100K service

Including:

New Genuine Water pump and HKS Timing belt

New Exhaust Manifold studs nuts and gasket

Good condition coil packs and NGK Iridiums

Turbo has got next to no shaft play and seems in great condition

Effortless 190rwkw with the power fc tuned running 12psi (never run more than 12psi)

Considering breaking it down: EOI Pm me

Head $580

Short Motor $280 Perfect working order when removed

Coil packs (awesome Condition) with loom $100

R33 Turbo/Mani/Split Dump (manifold has some sort of black heat coating and new studs looks schmick) $520

Plenum Throttle Body assembly $50

Stock Air Box $150

Stock cooler pipes $50

Aircon $120

Powersteering pump $120

Starter Motor $??

R32 Loom $??

R32 RB25DE NA Computer $100

R33 RB25DET Computer $140

R33 Air Flow Meter (AFM) $120

Carbon Canister $20

Near New (500kms) HKS Timing belt $80

Near New Genuine Nissan Water Pump $40

Brand new Genuine NISMO Short shifter $??

Brand new Genuine Nissan Timing belt $90

Can deliver to Goldcoast / Ipswich / Northside Brisbane for Beer (whole motor only)

Edited by dano4127
Link to comment
https://www.sau.com.au/forums/topic/203980-rb25det/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...