Jump to content
SAU Community

Recommended Posts

Hi all,

I am considering to import a Skyline R32 GTR as a weekend/track car.

A few quick questions for those who own one...

1. Who (in Sydney) look after your R32?

2. Are R32s very hard and expensive to maintain compare to the other JDMs?

3. Are there any common problems/hard to fix problems?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/204096-newbie-questions-regarding-r32/
Share on other sites

Hi all,

I am considering to import a Skyline R32 GTR as a weekend/track car.

A few quick questions for those who own one...

1. Who (in Sydney) look after your R32?

2. Are R32s very hard and expensive to maintain compare to the other JDMs?

3. Are there any common problems/hard to fix problems?

Thanks in advance.

Welcome!

1. I dont have a 32 GTR but Unigroup and Grey Imports look after my car. I have done a fair bit of track work and many driving/track events with mine and so far so good.

2. GTR's compared to say...late model type R JDM? (Prob better of using the term "import" or so here, unless you are on JDMST forums....) Then yes, it will cost more. Most people here will say budget another 8 - 10k for a 32GTR if its "cheap" because it may need to be rebuilt. They are getting on in age, and also the history comes into play.

3. Common problems - Im sure theres quite a few! If you have BIG hp - standard gearbox wont hold up after a while - and old member here went through 2 gearboxes with 370akwk

Oil pump?

Turbo's?

Compression etc

These need to be considered and checked if possible!

If its for the track, Duncan is the best man to speak with, same with T04GTR :(

Good luck mate!

Cheers!

Depends if your mechanic has had exp with them!!

Ive got a lock bar for my HICAS - however if you take it to a place that knows them, you wont have a drama!

Question - Is that one of the deciding factors for buying the GTR?

If it is - I wouldnt worry, theres alot of people on here who can help and theres many work shops in Sydney!

You'll be right mate - go out and buy!!!

One inherrent problem is oil control. Its potentially dangerous and rather annoying to rectify, ie. sump baffle plates, oil restrictors, overfilling your oil, upgrading your sump.

Other than that, just check the compression, and you may want to change to steel-wheeled turbos. Some people find HICAS annoying too.

Besides that its a great quick car. Oh and the gearboxes dont handle redline, 350awkw+ super quick smash-it-in-style shifts very well.

Hi all,

I am considering to import a Skyline R32 GTR as a weekend/track car.

A few quick questions for those who own one...

1. Who (in Sydney) look after your R32? I have a Gtst but it's close enough.. I have been through a couple of workshops and I just can't go past Powerplay imports in Drummoyne.. They are GTR specialists.. There work is fantastic..

www.powerplayimports.com

2. Are R32s very hard and expensive to maintain compare to the other JDMs? There about the same.. Most of the parts these days are cheap.. Usually easy to find.. Even the 2nd hand stuff is worth looking at.

3. Are there any common problems/hard to fix problems? Usually just old wear and tear.. Mostly Bushes go on them and suspention parts before anything else happens..

Thanks in advance.

Depends if your mechanic has had exp with them!!

Ive got a lock bar for my HICAS - however if you take it to a place that knows them, you wont have a drama!

Question - Is that one of the deciding factors for buying the GTR?

If it is - I wouldnt worry, theres alot of people on here who can help and theres many work shops in Sydney!

You'll be right mate - go out and buy!!!

Haha I just had mine rear rack welded up.. Stuff those lockbars!

Besides that its a great quick car. Oh and the gearboxes dont handle redline, 350awkw+ super quick smash-it-in-style shifts very well.

Another Question in relation to the gear box, what is a common replacement? can you source one from another car or would it require a complete aftermarket gearbox. As i have heard of drifters using the R33 GTST gear box.

Thanks

gearbox? you can go another used one for about 800, rebuild yours or buy a brand new one for about 2500 or go aftermarket (os giken 5k, PPG 10k, hollinger 20k) that about covers the range. Until you get to pretty big powe rthe box will be fine

where are you based? there are good shops all over the place.

1. Who (in Sydney) look after your R32?

2. Are R32s very hard and expensive to maintain compare to the other JDMs?

3. Are there any common problems/hard to fix problems?

1) There are no shortage of people/workshops doing good work on GTRs. They've been out for ages, and there is a well trodden path for any type of upgrade you can think of. There is nothing new under the sun when i comes to R32 GTRs.

2) It depends on who you talk to. If you talk to P-plater who borrowed to buy and can afford to maintain it, then they would say yes. But as you are buying a track/weekend car, then you expect to need to replace a whole list of 8year old parts. Compared to my previous track/weekend weapons the costs have been the same.

I think there is a perception that these cars are expensive to fix/maintain, but i think that comes more from the kids/P-platers who buy them and can't afford to maintain them, yet want to flog the guts out of them. If your buying a car for the track, then you will need a bank of cash to support it. Same with any track car. With my last track car (rotary) i had to rebuild two engines.

3) I don't think there are any 'hard to fix' problems with the R32 GTR. For the track and age of the car you couldn't go wrong with doing the following;

-Your suspension will be 9-7years old. Replace the lot, and piss off the HICAS.

-Heat will be something to watch on the track. Fit an oil cooler + powersteering cooler and while you're at it, a larger radiator isn't going to break the bank.

-Hi RPM and cornering added with the oil control issue with the RB26 will be something to think about. There are a few options here, some are cheap and others require the engine to come out. Do a search on oil control modifications.

-I found i got some advantages out of a attesa controller.

-Gearbox syncros in 3-4th will stuff up under the hammering. You've got a few options already outlined.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...