Jump to content
SAU Community

Recommended Posts

hi i have a small issue with my r33 gtst. running 250bhp (186kw)

when driving along at ANY (even at 80 or 90mph) (128 or 144kph)speed and holding it at a set speed its like it drops in and out of overdrive but as soon as i come of the throtle and back on it or press the throtle it gose back to normal till it dose it again.

i have done a system check via the power button light and i got 1 long flash followed by 10 short flash so there seems no faulf on there and the atf level is ok and no burnt smell.

this is confusing me and i want to get it sorted as i have mv auto's valve body for it but dont want to put it in if the box is knackered

any help apreciated please

Edited by wolf
Link to comment
https://www.sau.com.au/forums/topic/204366-r33-auto-box-hunting/
Share on other sites

Does the O/D OFF light on the dash also intermittenly flash on & off?

It's mostly likely to be electrical. Remove the shifter surround console & visually check the O/D button & along its wiring for any loose/ damaged connection. Then test it using a 12V test light or a multimeter on the O/D switch wire.

Otherwise you may have very low line pressure which can be casued by a number of things but, cleaning the ATF filter may help.

If neither of these are the case give Mike from MV Autos a call as he'll be more than happy to help you out.

  • 2 weeks later...
hi i have a small issue with my r33 gtst. running 250bhp (186kw)

when driving along at ANY (even at 80 or 90mph) (128 or 144kph)speed and holding it at a set speed its like it drops in and out of overdrive but as soon as i come of the throtle and back on it or press the throtle it gose back to normal till it dose it again.

i have done a system check via the power button light and i got 1 long flash followed by 10 short flash so there seems no faulf on there and the atf level is ok and no burnt smell.

this is confusing me and i want to get it sorted as i have mv auto's valve body for it but dont want to put it in if the box is knackered

any help apreciated please

Are you running an aftermarket computer? If you are, almost no models come with a shift controller for an Auto box, as a result, the ride will be ragged an unpredictable. They basically run maximum line pressure, rev it up and just whack her in gear whole doing funny things with your O/D. Best thing if you're running an aftermarket computer is to purchase a separate shift controller unit and install that on the car so it has the smarts to deal with the auto box.

Are you running an aftermarket computer? If you are, almost no models come with a shift controller for an Auto box, as a result, the ride will be ragged an unpredictable. They basically run maximum line pressure, rev it up and just whack her in gear whole doing funny things with your O/D. Best thing if you're running an aftermarket computer is to purchase a separate shift controller unit and install that on the car so it has the smarts to deal with the auto box.

nope i have the standard ecu and no other add on computers

i did do an ecu reset and was fine for a few days then came back

  • 3 weeks later...

i have a similar prob. it also happens when cruising at anywhere above 80kph. the box just drops into overdrive and refuses to shift up. sometimes it seems to do it less if im in snow - which also seems to make it shift up sooner. i have tried completely coming off the throttle but it does nothing positive. i have to rev it hard in 3rd to maintain speed. once i clunked it into neutral and back to drive. seemed to do the trick but only that once.

i have a similar prob. it also happens when cruising at anywhere above 80kph. the box just drops into overdrive and refuses to shift up. sometimes it seems to do it less if im in snow - which also seems to make it shift up sooner. i have tried completely coming off the throttle but it does nothing positive. i have to rev it hard in 3rd to maintain speed. once i clunked it into neutral and back to drive. seemed to do the trick but only that once.

yep but what i have found is when i do an ecu reset it goes for a few days. also when it does do it i now give the accelerator a bit of stick and it goes and stops doing it till next time the car is switched off. but got mv auto's valve body a new filter and oil for it so see if that cures it

  • 2 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...