Jump to content
SAU Community

Recommended Posts

Hey guys/Gals

I was on the way back from the coast on Sat nite and was having a friendly blat with another car . I was in 5th, went down to 4th then back to 3rd and took off.. I was taking it out in 3rd. I think it was around 5and 1/2 to 6 k when i felt a shudder..I changed to 4th straight away and it was ok.. I drove to Brisbane and then back to Ipswich ok. I was curious as to what that shudder was. I probably shouldnt have taken 3rd out so far. Just worried i stuffed something by what i did

Cheers

Richmond

Link to comment
https://www.sau.com.au/forums/topic/2051-a-shudder-in-3rd/
Share on other sites

Hi,

I have a similar problem with my 93 r33gtst.

When flooring it, the car surges at around 5 - 5500rpm. The boost seems to be peaking at about 8-9psi.

It happens all the time when the right foot is flat, however, hold the acc just a smidgeon off full throttle, and it is sweet.

It happens more in the cold, sometimes surging both at 4 and 5000rpm. Once it is past these revs, it continues on up to the rev limiter.

I have had a couple of guys listen to it, doens't seems to be pinging, no strange noises. The car is totally stock, stock i/c, exh, wheels etc. Looks to be in good condition. The car is 1 weeks old. I haven't checed the plugs yet, or cam timing, but I don't think it is that anyway

My only thoughts is that it might be the fuel cut?? or some kind of protection circuits coming into play or something along those lines. Dunno, but it is driving me insane because anytime I give it a bit, I have a surge, lost ground to dunnydores, then spend my time catching up.

If anyone could let me know what's the go it would be fantastic.

Link to comment
https://www.sau.com.au/forums/topic/2051-a-shudder-in-3rd/#findComment-37861
Share on other sites

Cheers for that Macka,

Will try it on the weekend.

Unfortunately at the moment my car is getting the clutch replaced under warranty. The car is only 1 week old (Although I did know the clutch was on the way out when I bought it).

Oh well better then wasting money on a piece of ****e commodore.

Link to comment
https://www.sau.com.au/forums/topic/2051-a-shudder-in-3rd/#findComment-38306
Share on other sites

Macka,

The boost is stock, I just have noticed that when I have the shuddering/surging problem it seems to be a smidgeon higher than 7psi. But apart from that I haven't touched the boost at all.

I actually haven't fried the clutch, the clutch was faulty when I bought it. I have been through far too many hassles with Suzuki GTi's (don't ask) to know about ****ing clutches.

I have treated my girl real nice, no burnouts or any stupid **** like that. I can't afford to have my car off the road because I use it for work.

Basically the car yard agreed to replace my clutch because it wore out so soon. I called up AVWG, the initally said they would cover it, then they palmed the blame off on to the car yard.

Anyway, hopefully I can work out something to get a heavy duty, cause my mates Skyline did the same thing to 3 clutches (while still at the workshop).

Anyway, does anyone have more ideas about this surging problem??

Cheers

Link to comment
https://www.sau.com.au/forums/topic/2051-a-shudder-in-3rd/#findComment-38637
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...